2015 Volkswagen Tiguan - Windshield wipers and washer (8 pages)
Download Windshield wipers and washer
Manual Description
In this section you'll find information about, checking and refilling windshield washer fluid , windshield washer fluid without enough frost protection can freeze windshield, use the windshield washer system with enough frost protection winter temperatures.
Never use the windshield wipers/washers when it is freezing without first defrosting, worn or dirty wiper blades reduce visibility and increase the risk accidents severe, always replace wiper blades that are worn, damaged, or do not keep windshield clear, to help prevent damage to the wiper blades and the wiper motor when it cold outside.
Always make sure that blades are not frozen to the windshield before operating wipers, using the windshield wiper service position can be helpful in cold weather so wipers do not, Please first read and note the introductory information heed WARNINGS, refill windshield washer reservoir next.
When the ignition is switched on, several warning and indicator lights come on briefly function, failure to heed warning lights or text WARNINGS can result vehicle damage, move the lever to desired position ⇒ , adjust the interval settings with switch ⇒ fig.
The sensitivity of the rain sensor (vehicles with rain sensors), pull the lever toward the steering wheel to activate windshield washers, then, intermittent wiping for the rear window, press the lever forward as far as it will go to activate the rear window washers, then.
Using the service position can be helpful in cold weather so the wipers do not freeze, same wiping speed when the ignition is switched on again, objects on the windshield can damage the wipers wiper motor, remove snow and ice from the wipers before you begin driving.
If the wiper blades freeze to the windshield, loosen them carefully, never switch on the windshield wipers when the windshield is dry because windshield can, the windshield wipers work only if the ignition is switched on and the engine hood closed, windshield wipers turn off automatically when the engine hood is opened.
Turn off automatically when the rear hatch opened, if the front wipers are on, the rear wiper is switched on automatically when backing up, if the windshield wiper lever is in the rear window intermittent wiping position ⇒ fig, the ignition is switched off and back on or the engine is started, rear window wiper action does not.
Resume until the windshield wipers are activated, feature and activate the rear window wiper immediately, the intermittent wiping for the front windshield depends on the driving speed, speed, the faster wipers move.
When the vehicle not moving, the wiper speed changes temporarily next lower, while the washer system working, Climatronic, switches to recirculation for about 30 seconds help.
Prevent the washer fluid odor entering vehicle, speed-dependent interval control: The higher vehicle, the heating thaws frozen water nozzles, but not the fluid supply hoses, on, the heat applied to the washer nozzles is automatically regulated depending outside air.
If there is something on the windshield, the wiper will try to wipe it away, the wiper, the wiper will stop moving, in the service position, the wiper arms can be lifted away from the windshield ⇒ fig, moved to the service position follows.
The engine hood must be closed ⇒ Working engine compartment, switch the ignition off, turn it on briefly, then off again, press the windshield wiper lever down briefly ⇒ fig, carefully fold the wiper arms back onto the windshield before driving! Switch the ignition press.
The windshield wiper lever down briefly ⇒ fig, lifting the wiper blades and tilting them away windshield, put the wiper arms service position ⇒ .
Manual Description
In this section you'll find information about, checking and refilling windshield washer fluid , windshield washer fluid without enough frost protection can freeze windshield, use the windshield washer system with enough frost protection winter temperatures.
Never use the windshield wipers/washers when it is freezing without first defrosting, worn or dirty wiper blades reduce visibility and increase the risk accidents severe, always replace wiper blades that are worn, damaged, or do not keep windshield clear, to help prevent damage to the wiper blades and the wiper motor when it cold outside.
Always make sure that blades are not frozen to the windshield before operating wipers, using the windshield wiper service position can be helpful in cold weather so wipers do not, Please first read and note the introductory information heed WARNINGS, refill windshield washer reservoir next.
When the ignition is switched on, several warning and indicator lights come on briefly function, failure to heed warning lights or text WARNINGS can result vehicle damage, move the lever to desired position ⇒ , adjust the interval settings with switch ⇒ fig.
The sensitivity of the rain sensor (vehicles with rain sensors), pull the lever toward the steering wheel to activate windshield washers, then, intermittent wiping for the rear window, press the lever forward as far as it will go to activate the rear window washers, then.
Using the service position can be helpful in cold weather so the wipers do not freeze, same wiping speed when the ignition is switched on again, objects on the windshield can damage the wipers wiper motor, remove snow and ice from the wipers before you begin driving.
If the wiper blades freeze to the windshield, loosen them carefully, never switch on the windshield wipers when the windshield is dry because windshield can, the windshield wipers work only if the ignition is switched on and the engine hood closed, windshield wipers turn off automatically when the engine hood is opened.
Turn off automatically when the rear hatch opened, if the front wipers are on, the rear wiper is switched on automatically when backing up, if the windshield wiper lever is in the rear window intermittent wiping position ⇒ fig, the ignition is switched off and back on or the engine is started, rear window wiper action does not.
Resume until the windshield wipers are activated, feature and activate the rear window wiper immediately, the intermittent wiping for the front windshield depends on the driving speed, speed, the faster wipers move.
When the vehicle not moving, the wiper speed changes temporarily next lower, while the washer system working, Climatronic, switches to recirculation for about 30 seconds help.
Prevent the washer fluid odor entering vehicle, speed-dependent interval control: The higher vehicle, the heating thaws frozen water nozzles, but not the fluid supply hoses, on, the heat applied to the washer nozzles is automatically regulated depending outside air.
If there is something on the windshield, the wiper will try to wipe it away, the wiper, the wiper will stop moving, in the service position, the wiper arms can be lifted away from the windshield ⇒ fig, moved to the service position follows.
The engine hood must be closed ⇒ Working engine compartment, switch the ignition off, turn it on briefly, then off again, press the windshield wiper lever down briefly ⇒ fig, carefully fold the wiper arms back onto the windshield before driving! Switch the ignition press.
The windshield wiper lever down briefly ⇒ fig, lifting the wiper blades and tilting them away windshield, put the wiper arms service position ⇒ .
Volkswagen Models