2015 Volkswagen Passat - Lights (8 pages)
Download Lights
Manual Description
In this section you'll find information about, turn signal lever high beam switch , coming home / Leaving home features (orientation lighting) , always obey local vehicle lighting laws.
The driver is always responsible for correct headlight settings, crashes and other accidents can happen when you cannot see the road ahead when you, cannot be seen by other motorists, always switch on the low beam headlights at dusk or when it is dark whenever.
Weather is bad visibility poor, headlights that are aimed too high and improper use of the headlight flasher high beams, can blind and distract other drivers, always make sure that headlights properly adjusted.
Never use the headlight flasher or high-beams when they can blind distract other drivers, Please first read and note the introductory information heed WARNINGS, one or more driving lights not working, replace burned out bulb ⇒ .
If all light bulbs are OK, see an authorized, fog lights switched (indicator light, the indicator light blinks twice fast, turn signal is not working vehicle.
Check the turn signals vehicle, when the ignition is switched on, several warning and indicator lights come on briefly function, failure to heed warning lights and instrument cluster text messages can cause vehicle, break down in traffic and result in a collision serious personal injury.
Never ignore warning lights text WARNINGS, always stop the vehicle as soon as it is safe do so, whenever stalled or stopped for repair, move the vehicle a safe distance off road, stop, the engine, turn on the emergency flashers, and use other warning devices warn approaching traffic.
Never park the vehicle in areas where the hot catalytic converter exhaust system can, come into contact with dry grass, brush, spilled fuel, oil, or other material that can catch fire, a broken down vehicle presents a high accident risk for itself others, emergency flashers and set up a warning triangle warn oncoming traffic.
Failure to heed warning lights or text WARNINGS can result vehicle damage, high Intensity Discharge (HID) headlights provide bright, uniform lighting to help you see be, electrodes can wear down and the gap between them will get wider, increases the voltage to keep the arc's brightness constant.
Bulbs will also ultimately burn out, volkswagen Service facility check headlights, turn signal lever high beam switch, move the lever desired position.
An indicator light lights up in the instrument cluster when, switching the high beams off and operating the headlight flasher: The headlight flasher turns, the high beams as long as the lever is pulled and manually held in the pulled position, move the lever back to the home position to turn selected feature off.
Lane change signaling feature (convenience turn signal), to use the lane change signaling feature, move the lever up or down slightly, just to the point of resistance and then release it, signals and the turn signal indicator flash 3 times, the lever up or down, and go out when you release lever.
Lane change flash is switched on and off in the Lights & Vision menu instrument cluster, improper use of high beams can distract and blind others, causing accidents serious, the turn signal light works only when the ignition is switched on, even when the ignition is switched off ⇒ In an emergency.
The indicator light flashes twice as fast if a turn signal bulb burned out, high beams can only be switched on when low beams on, adjust the light switch to the desired position ⇒ fig.
Manual Description
In this section you'll find information about, turn signal lever high beam switch , coming home / Leaving home features (orientation lighting) , always obey local vehicle lighting laws.
The driver is always responsible for correct headlight settings, crashes and other accidents can happen when you cannot see the road ahead when you, cannot be seen by other motorists, always switch on the low beam headlights at dusk or when it is dark whenever.
Weather is bad visibility poor, headlights that are aimed too high and improper use of the headlight flasher high beams, can blind and distract other drivers, always make sure that headlights properly adjusted.
Never use the headlight flasher or high-beams when they can blind distract other drivers, Please first read and note the introductory information heed WARNINGS, one or more driving lights not working, replace burned out bulb ⇒ .
If all light bulbs are OK, see an authorized, fog lights switched (indicator light, the indicator light blinks twice fast, turn signal is not working vehicle.
Check the turn signals vehicle, when the ignition is switched on, several warning and indicator lights come on briefly function, failure to heed warning lights and instrument cluster text messages can cause vehicle, break down in traffic and result in a collision serious personal injury.
Never ignore warning lights text WARNINGS, always stop the vehicle as soon as it is safe do so, whenever stalled or stopped for repair, move the vehicle a safe distance off road, stop, the engine, turn on the emergency flashers, and use other warning devices warn approaching traffic.
Never park the vehicle in areas where the hot catalytic converter exhaust system can, come into contact with dry grass, brush, spilled fuel, oil, or other material that can catch fire, a broken down vehicle presents a high accident risk for itself others, emergency flashers and set up a warning triangle warn oncoming traffic.
Failure to heed warning lights or text WARNINGS can result vehicle damage, high Intensity Discharge (HID) headlights provide bright, uniform lighting to help you see be, electrodes can wear down and the gap between them will get wider, increases the voltage to keep the arc's brightness constant.
Bulbs will also ultimately burn out, volkswagen Service facility check headlights, turn signal lever high beam switch, move the lever desired position.
An indicator light lights up in the instrument cluster when, switching the high beams off and operating the headlight flasher: The headlight flasher turns, the high beams as long as the lever is pulled and manually held in the pulled position, move the lever back to the home position to turn selected feature off.
Lane change signaling feature (convenience turn signal), to use the lane change signaling feature, move the lever up or down slightly, just to the point of resistance and then release it, signals and the turn signal indicator flash 3 times, the lever up or down, and go out when you release lever.
Lane change flash is switched on and off in the Lights & Vision menu instrument cluster, improper use of high beams can distract and blind others, causing accidents serious, the turn signal light works only when the ignition is switched on, even when the ignition is switched off ⇒ In an emergency.
The indicator light flashes twice as fast if a turn signal bulb burned out, high beams can only be switched on when low beams on, adjust the light switch to the desired position ⇒ fig.
Volkswagen Models