Download Instrument cluster
Manual DescriptionIn this section you'll find information about, display of the selected gears (automatic transmission), service reminder information ⇒ booklet Warranty Maintenance, driving on today's roads demands the full attention of the driver at all times.
Never use the buttons in the instrument cluster while driving, Please first read and note the introductory information heed WARNINGS, tachometer (shows engine revolutions per minute in thousands when engine running), per minute) for all gears after the break-in period.
Higher gear or selector level position D, or ease your foot off accelerator ⇒ , reset button for the trip odometer display (trip), button for setting the instrument cluster clock, the Radio or Radio & Navigation system, – With the ignition on, push the button to highlight the hour or the minutes clock.
– To advance the clock, push the 0, to help prevent engine damage, always avoid high engine speeds, full throttle acceleration, and heavy engine loads when engine cold, to help prevent engine damage, the tachometer needle should only enter red zone.
Upshifting early into the next higher gear saves fuel reduces engine noise, applies to the market: Applicable only USA, front driver side door, D: Open rear passenger side door, on appropriately equipped vehicles, the clocks can also be set via the Settings menu instrument.
Depending on the vehicle model, different information may be shown in instrument cluster display, open door, engine hood, or luggage compartment lid ⇒ fig, multi-Function Indicator (MFI) and menus different settings, the status of various vehicle functions and components is monitored when the ignition switched.
The instrument cluster display (Warning and indicator lights, Warning and indicator lights, Warning, symbol flashing or lit – sometimes with acoustic warnings, check malfunction and take corrective action, volkswagen dealer or an authorized Volkswagen Service Facility.
Menus cannot be accessed when a priority 1 warning message, symbol flashing or continuously lit – sometimes with acoustic warnings, malfunctions or low operating fluid levels may cause vehicle damage vehicle breakdown, check malfunction as soon as possible.
The odometer indicates the total distance driven by vehicle, the trip odometer (Trip) shows the distance driven since the last time the trip odometer was reset, the last digit indicates 1/10 mile (100 meters), at outside temperatures below about +39 °F (+4 °C), a snowflake symbol” (icy road warning) appears.
When the vehicle is not moving or when you are driving at very low speeds, temperature displayed, may be slightly higher than actual outside temperature, the measurement range is from -40 °F (-40 °C) to +122 °F (+50 °C), on vehicles equipped with compass display, the current compass direction is indicated in the instrument cluster display when the ignition and navigation system switched on, Compass.
The selector lever position is shown both on the side of the selector lever and instrument cluster, drive S, as well Tiptronic® mode, failure to heed warning lights and instrument cluster text messages can cause vehicle, break down in traffic and result in a collision serious personal injury.
Never ignore warning lights text WARNINGS, always stop the vehicle as soon as it is safe do so, park the vehicle at a safe distance from moving traffic and where no part of the hot catalytic converter and exhaust system can come into contact with flammable materials under, vehicle, such as dry grass, brush, spilled fuel, etc.
A broken down vehicle presents a high accident risk for itself others, emergency flashers and set up a warning triangle warn oncoming traffic, roads and bridges may be dangerously icy even if the outside air temperature above freezing, that roads can even ice over at temperatures above +39 °F (+4 °C).
The snowflake symbol” (icy road warning) is not displayed, there could still be black ice, never rely exclusively on outside temperature display, failure to heed warning lights or text WARNINGS can result vehicle damage.