Download Instrument cluster
Manual DescriptionIn this section you'll find information about, service reminder information ⇒ Booklet Warranty Maintenance, driving on today's roads demands the full attention of the driver at all times, never use the buttons in the instrument cluster while driving.
Please first read and note the introductory information heed WARNINGS, tachometer (thousands of revolutions per minute when engine running), per minute) for all gears after the break-in period, higher gear or selector lever position D, or ease your foot off accelerator ⇒.
To help prevent engine damage, always avoid high engine speeds, full throttle acceleration, and heavy engine loads when engine cold, to help prevent engine damage, the tachometer needle should only enter red zone, upshifting early into the next higher gear saves fuel reduces engine noise.
Door, D: Open rear passenger side door, depending on the vehicle model and equipment level, different information may be shown, open doors, engine hood, or rear hatch ⇒ fig, driving data display and menus different settings.
Radio and navigation information ⇒ Booklet Radio, Navigation System, telephone information ⇒ Booklet Mobile phone package, open doors, hood, rear hatch, the instrument cluster display indicates if any doors, the engine hood, or rear hatch open once.
Vehicle has been unlocked, and while the vehicle is in motion, the engine hood is open not properly closed, the rear hatch is open not properly closed, one or more vehicle doors open not properly closed.
The status of various vehicle functions and components is monitored when the ignition switched, the instrument cluster display (⇒ Warning and indicator lights), in addition, a list of all current warning and information messages can be opened manually, vehicle status or Vehicle main menu in the instrument cluster display ⇒ Volkswagen Information System.
Symbol flashing or lit – sometimes with acoustic warnings, check malfunction and take corrective action, volkswagen dealer or an authorized Volkswagen Service Facility, menus cannot be accessed when a priority 1 warning message.
By pressing the button on multi-function steering wheel, symbol flashing or continuously lit – sometimes with acoustic warnings, malfunctions or low operating fluid levels may cause vehicle damage vehicle breakdown ⇒, check malfunction as soon as possible.
Displayed in color on an instrument cluster with color display, the odometer indicates the total distance driven by vehicle, the trip odometer (trip) shows the distance driven since the last time the trip odometer was reset, the last digit indicates 1/10 mile (100 meters).
Press the button in the instrument cluster briefly ⇒ Instrument overview to reset trip odometer, the word Time appears in the display, press the button repeatedly until the correct hour is displayed, once you have set the hour, wait a few seconds until the minutes display highlighted.
Press the button repeatedly until the correct minutes are displayed, release the button to finish setting clock, on appropriately equipped vehicles, you can also set the time in the Infotainment system by pressing, the button followed by the and Time and date function keys ⇒ Menu system settings.
At outside temperatures below about +39 °F (+4 °C), a snowflake symbol” (icy road warning) appears in the display, when the vehicle is not moving or when you are driving at very low speeds, temperature displayed, may be slightly higher than actual outside temperature, the measurement range is from -49 °F (-45 °C) +169 °F (+76.
On vehicles equipped with compass display, the current compass direction is indicated in the instrument cluster display when the ignition and navigation system switched on, the selector lever position is shown both on the side of the selector lever and instrument cluster, drive (DS), as well as in Tiptronic® mode ⇒ Shifting.