2015 Toyota Sienna - Adjusting the seats (28 pages)
Download Adjusting the seats
Manual Description
Vertical height adjustment lever (driver's side only), lumbar support adjustment switch (driver's side only)*, seat cushion (front) angle adjustment switch (driver's side only), vertical height adjustment switch (driver's side only).
Lumbar support adjustment switch (driver's side only), presses against the seatback during a rear-end collision, head, risk of whiplash seat occupant, even small forces applied to the seatback may cause head restraint.
● Take care when adjusting the seat position to ensure that other passengers are not injured by moving seat, fingers or hands may become jammed seat mechanism, ● Make sure to leave enough space around the feet so they do not get stuck, ● Be careful that the seat does not hit passengers luggage.
● To reduce the risk of sliding under the lap belt during collision, do not, recline the seat more than necessary, if the seat is reclined too far, the lap belt may slide past hips apply, restraint forces directly to the abdomen or your neck may contact.
Shoulder belt, increasing the risk of death or serious injury event, adjustments should not be made while driving as the seat may unexpectedly move and cause the driver to lose control vehicle, ● Manual seat: After adjusting the seat, make sure that the seat locked, refer to AUTO ACCESS SEAT OWNER'S MANUAL”.
Pull the seatback angle adjustment lever fold down, moving a second seat third seat access, pull the strap fold down, make sure that no passenger.
After passengers have entered/exited vehicle, lift up the seatback and slide the seat backward until it locks, removing the second outside seats (Tip-up seats), lever and fold down the seatback.
Slide the seat forward lock position, the cushion and simultaneously lift seat, removing the second seats (Ottoman seats), lever and fold down seatback.
Slide the seat to forward lock position, removing the second center seat (if equipped), align the marking on the seat side cover to marking, rail cover and align the marking on the seat front/back cover.
Lower the seat engage latches, if you locked the seat latches unintentionally before installing securely, pull the release lever unlock latches, make sure the seat is locked in place by trying shake seatback.
And lift up seat cushion, installing the second center seats (if equipped), engage the rear pins with, make sure the seat locked.
Seatback and lift up seat, folding down the third seats (manual seats), restraints and lower the center head restraint to the lowest position (P, pull the TO FOLD/LIFT SEATBACK” strap fold down.
Pull the TO FOLD/LIFT SEATBACK” strap, raise, folding down the third seats (power seats), you can operate the power third seats when the shift lever P, restraint to the lowest position (P.
Press the folding/returning switch, returning switch (P, stowing the third seats (manual seats), before stowing or returning third seat, remove any items floor.
Manual Description
Vertical height adjustment lever (driver's side only), lumbar support adjustment switch (driver's side only)*, seat cushion (front) angle adjustment switch (driver's side only), vertical height adjustment switch (driver's side only).
Lumbar support adjustment switch (driver's side only), presses against the seatback during a rear-end collision, head, risk of whiplash seat occupant, even small forces applied to the seatback may cause head restraint.
● Take care when adjusting the seat position to ensure that other passengers are not injured by moving seat, fingers or hands may become jammed seat mechanism, ● Make sure to leave enough space around the feet so they do not get stuck, ● Be careful that the seat does not hit passengers luggage.
● To reduce the risk of sliding under the lap belt during collision, do not, recline the seat more than necessary, if the seat is reclined too far, the lap belt may slide past hips apply, restraint forces directly to the abdomen or your neck may contact.
Shoulder belt, increasing the risk of death or serious injury event, adjustments should not be made while driving as the seat may unexpectedly move and cause the driver to lose control vehicle, ● Manual seat: After adjusting the seat, make sure that the seat locked, refer to AUTO ACCESS SEAT OWNER'S MANUAL”.
Pull the seatback angle adjustment lever fold down, moving a second seat third seat access, pull the strap fold down, make sure that no passenger.
After passengers have entered/exited vehicle, lift up the seatback and slide the seat backward until it locks, removing the second outside seats (Tip-up seats), lever and fold down the seatback.
Slide the seat forward lock position, the cushion and simultaneously lift seat, removing the second seats (Ottoman seats), lever and fold down seatback.
Slide the seat to forward lock position, removing the second center seat (if equipped), align the marking on the seat side cover to marking, rail cover and align the marking on the seat front/back cover.
Lower the seat engage latches, if you locked the seat latches unintentionally before installing securely, pull the release lever unlock latches, make sure the seat is locked in place by trying shake seatback.
And lift up seat cushion, installing the second center seats (if equipped), engage the rear pins with, make sure the seat locked.
Seatback and lift up seat, folding down the third seats (manual seats), restraints and lower the center head restraint to the lowest position (P, pull the TO FOLD/LIFT SEATBACK” strap fold down.
Pull the TO FOLD/LIFT SEATBACK” strap, raise, folding down the third seats (power seats), you can operate the power third seats when the shift lever P, restraint to the lowest position (P.
Press the folding/returning switch, returning switch (P, stowing the third seats (manual seats), before stowing or returning third seat, remove any items floor.
Toyota Models