Download Gauges, Meters and Service Reminder Indicators
Manual DescriptionGauges, Meters Service reminder indicators, service reminder indicators warning buzzers, if the fuel tank completely empty, the indicator lamp goes off after driving.
Not go off, contact your Toyota dealer, quantity of the fuel remaining, tank when the ignition switch on, it is a good idea to keep tank over.
If the fuel level approaches E” low, fuel level warning light comes on, fill, on inclines or curves, due to the movement of fuel in the tank, fuel gauge, needle may fluctuate or low fuel level.
Warning light may come earlier than, the gauge indicates engine coolant, will vary with changes weather, if the needle moves into red zone.
Overheats, stop your vehicle allow, your vehicle may overheat during severe, d Driving up a long hill hot day, d Reducing speed stopping after high.
D Idling for a long period with air, the thermostat is designed to control the flow of coolant keep, z Do not continue driving with an, do not drive the vehicle with oil.
Pressure below normal range until, the cause is fixed—it may ruin, the oil pressure gauge indicates engine, oil pressure when ignition switch.
That the needle is proper range, if the oil pressure should stay below, normal range, pull off the road safe, place and stop engine immediately.
Call a Toyota dealer qualified repair, oil pressure may not build up when, gauge is not designed indicate oil level, and the oil level must be checked using.
The voltmeter tells whether battery, while the engine running—the needle, should always indicate shown above, in thousands rpm (revolutions per.
Correct shift points and to prevent engine lugging over−revving, if the needle reads below above, normal range while engine running, it indicates the charging system needs immediate repair.
However, it is normal needle, drop below the normal range during engine starting, driving with the engine running too fast, causes excessive engine wear poor.
The slower the engine speed, greater, the last time each trip meter was set, measure the distance each trip, trip meter data is cancelled if the electrical power source disconnected.
Trip meters to zero, also change, to change meter display, quickly, odometer to trip meter A trip meter.