2001 Toyota Sequoia - Air Conditioning System (12 pages)
Download Air Conditioning System
Manual Description
For automatic operation of the air conditioning, press the AUTO” button, automatic operation mode has been selected, turn the knob to adjust fan speed—to, the right to increase, to left decrease.
In the automatic operation mode, air, conditioning selects most suitable fan, speed and air flow, on−off of the air conditioning and air intake according, when you press AUTO” button with.
The air intake mode FRESH, internal, circulation may be applied maximum, when you adjust temperature selector, button to maximum cooling, MAX.
COLD” message will appear display, and the air intake mode will be automatically changed RECIRCULATE, in automatic operation, fan speed, turn the knob to adjust the temperature—to the right to warm, left.
C” and F” when the unit outside, push the button to turn off air conditioning system, you may use manual controls you want, press the button to select vents used.
In automatic operation, air flow mode, is selected automatically among Panel, Bi−, level and Floor unless you desire another, to turn off automatic operation, press.
It is recommended close lower, panel vents” on page 179 section, vents and instrument panel vents, when you set temperature selector.
Setting at about middle automatic, operation, warm air flows out, floor vents and relatively low−temperature air flows out center, for details about air flow selector settings.
See —Air flow selector settings” described below, for further information removing frost, and fog, see Instrument panel vents”, from the floor vents windshield.
Use with the air intake selector positioned FRESH, when this button pressed, air flows, pressing the button once again returns, air flow mode to last one used.
This button allows the air intake select, mode, press the air intake selector button, press the A/C” button dehumidified, if the A/C” button indicator flashes, there.
Press the button to select air source, to prevent fogging up windshield, the air intake mode may change automatically to FRESH depending on the condition of air conditioning system, for example, when the ambient temperature is low, the air intake mode may.
D To cool off your Toyota after it has, been parked in the hot sun, drive with, the windows open few minutes, this vents the hot air, allowing air.
Conditioning to cool interior more, d Make sure the air intake grilles front, d On humid days, do not blow cold air.
Manual Description
For automatic operation of the air conditioning, press the AUTO” button, automatic operation mode has been selected, turn the knob to adjust fan speed—to, the right to increase, to left decrease.
In the automatic operation mode, air, conditioning selects most suitable fan, speed and air flow, on−off of the air conditioning and air intake according, when you press AUTO” button with.
The air intake mode FRESH, internal, circulation may be applied maximum, when you adjust temperature selector, button to maximum cooling, MAX.
COLD” message will appear display, and the air intake mode will be automatically changed RECIRCULATE, in automatic operation, fan speed, turn the knob to adjust the temperature—to the right to warm, left.
C” and F” when the unit outside, push the button to turn off air conditioning system, you may use manual controls you want, press the button to select vents used.
In automatic operation, air flow mode, is selected automatically among Panel, Bi−, level and Floor unless you desire another, to turn off automatic operation, press.
It is recommended close lower, panel vents” on page 179 section, vents and instrument panel vents, when you set temperature selector.
Setting at about middle automatic, operation, warm air flows out, floor vents and relatively low−temperature air flows out center, for details about air flow selector settings.
See —Air flow selector settings” described below, for further information removing frost, and fog, see Instrument panel vents”, from the floor vents windshield.
Use with the air intake selector positioned FRESH, when this button pressed, air flows, pressing the button once again returns, air flow mode to last one used.
This button allows the air intake select, mode, press the air intake selector button, press the A/C” button dehumidified, if the A/C” button indicator flashes, there.
Press the button to select air source, to prevent fogging up windshield, the air intake mode may change automatically to FRESH depending on the condition of air conditioning system, for example, when the ambient temperature is low, the air intake mode may.
D To cool off your Toyota after it has, been parked in the hot sun, drive with, the windows open few minutes, this vents the hot air, allowing air.
Conditioning to cool interior more, d Make sure the air intake grilles front, d On humid days, do not blow cold air.
Toyota Models