2015 Toyota RAV4 - Operating the lights and wipers (20 pages)
Download Operating the lights and wipers
Manual Description
The headlights can be operated manually automatically, running lights and instrument panel lights turn on, turning on high beam headlights, the lever away you turn.
Pull the lever toward you, you can flash high beams with, ● Compared to turning on the headlights, the daytime running light system, offers greater durability and consumes less electricity, so it can help improve.
Headlight control sensor (if equipped), the sensor may not function properly an, object is placed on sensor, anything, that blocks the sensor affixed.
Doing so interferes with sensor, detecting the level ambient light, may cause the automatic headlight system malfunction, ● To make your vehicle more visible to other drivers, headlights turn.
Automatically (at a reduced intensity) whenever the engine started, : The lights turn off 30 seconds after, the engine switch is turned to the LOCK” position (vehicles without smart, key system) or off (vehicles with a smart key system) and door opened.
Key is pressed while all doors locked, : The lights turn off after engine switch, turned to the LOCK” position (vehicles without a smart key system) off, (vehicles with a smart key system) and the driver's door opened.
To turn the lights on again, turn the engine switch to the ON” position (vehicles without a smart key system) or to IGNITION ON mode (vehicles with, smart key system), or turn the light switch off, then turn it, system), the lights automatically turn off after 20 minutes, Vehicles without smart key system.
A buzzer sounds when the engine switch is turned to LOCK” position, Vehicles with smart key system, a buzzer sounds when the engine switch is turned off and driver's door, opened while the lights turned on.
Do not leave the lights on longer than necessary when engine not, the Automatic High Beam uses an in-vehicle camera sensor, assess the brightness of streetlights, the lights oncoming, activating the Automatic High Beam system.
Push the lever away you with, the Automatic High Beam indicator will come on when the headlights turned automatically, high beam automatic turning off conditions, when all of the following conditions are fulfilled, high beam will be.
● Vehicle speed is above approximately 21 mph (34 km/h), ● The area ahead of vehicle dark, ● There are no oncoming or preceding vehicles with headlights tail, ● There are few streetlights road ahead.
● Vehicle speed drops below approximately 17 mph (27 km/h), ● The area ahead of the vehicle not dark, ● Oncoming or preceding vehicles have headlights tail lights, ● There are many streetlights road ahead.
Turning the high beam on/off manually, pull the lever original position, the Automatic High Beam indicator will turn off high, the Automatic High Beam can be operated when.
The engine switch is ON” position, the engine switch is IGNITION ON mode, ● High beam may not be automatically turned off following situations.
Manual Description
The headlights can be operated manually automatically, running lights and instrument panel lights turn on, turning on high beam headlights, the lever away you turn.
Pull the lever toward you, you can flash high beams with, ● Compared to turning on the headlights, the daytime running light system, offers greater durability and consumes less electricity, so it can help improve.
Headlight control sensor (if equipped), the sensor may not function properly an, object is placed on sensor, anything, that blocks the sensor affixed.
Doing so interferes with sensor, detecting the level ambient light, may cause the automatic headlight system malfunction, ● To make your vehicle more visible to other drivers, headlights turn.
Automatically (at a reduced intensity) whenever the engine started, : The lights turn off 30 seconds after, the engine switch is turned to the LOCK” position (vehicles without smart, key system) or off (vehicles with a smart key system) and door opened.
Key is pressed while all doors locked, : The lights turn off after engine switch, turned to the LOCK” position (vehicles without a smart key system) off, (vehicles with a smart key system) and the driver's door opened.
To turn the lights on again, turn the engine switch to the ON” position (vehicles without a smart key system) or to IGNITION ON mode (vehicles with, smart key system), or turn the light switch off, then turn it, system), the lights automatically turn off after 20 minutes, Vehicles without smart key system.
A buzzer sounds when the engine switch is turned to LOCK” position, Vehicles with smart key system, a buzzer sounds when the engine switch is turned off and driver's door, opened while the lights turned on.
Do not leave the lights on longer than necessary when engine not, the Automatic High Beam uses an in-vehicle camera sensor, assess the brightness of streetlights, the lights oncoming, activating the Automatic High Beam system.
Push the lever away you with, the Automatic High Beam indicator will come on when the headlights turned automatically, high beam automatic turning off conditions, when all of the following conditions are fulfilled, high beam will be.
● Vehicle speed is above approximately 21 mph (34 km/h), ● The area ahead of vehicle dark, ● There are no oncoming or preceding vehicles with headlights tail, ● There are few streetlights road ahead.
● Vehicle speed drops below approximately 17 mph (27 km/h), ● The area ahead of the vehicle not dark, ● Oncoming or preceding vehicles have headlights tail lights, ● There are many streetlights road ahead.
Turning the high beam on/off manually, pull the lever original position, the Automatic High Beam indicator will turn off high, the Automatic High Beam can be operated when.
The engine switch is ON” position, the engine switch is IGNITION ON mode, ● High beam may not be automatically turned off following situations.
Toyota Models