2010 Toyota RAV4 - Operating the lights and wipers (7 pages)
Download Operating the lights and wipers
Manual Description
The headlights can be operated manually automatically, the side marker, parking, tail, license plate, turning on high beam headlights, pull the lever back center.
Position to turn high beams, pull the lever toward you, release the lever turn them off, you can flash high beams.
Daytime running light system (if equipped), to make your vehicle more visible to other drivers, headlights turn, automatically (at a reduced intensity) whenever the engine started, headlight control sensor (with automatic light control system).
The sensor may not function properly, an object is placed on the sensor, or anything that blocks the sensor affixed, doing so interferes with sensor, detecting the level ambient light.
May cause the automatic headlight system malfunction, the headlights and tail lights turn off 30 seconds after driver's door, opened and closed if the engine switch has been turned ACC” LOCK”, to turn the lights on again, turn the engine switch to ON” position.
Turn the headlight switch off then back, opened and closed if the ENGINE START STOP” switch has been turned, to turn the lights on again, turn the ENGINE START STOP” switch to IGNITION ON mode, or turn the headlight switch off then back, customization that can be configured Toyota dealer.
Do not leave the lights on longer than necessary when the engine not running, the fog lights improve visibility in difficult driving conditions, such, wiper intervals can be adjusted intermittent operation, the windshield wipers and washer can be operated when.
The engine switch is ON” position, the ENGINE START STOP” switch is IGNITION ON mode, if no windshield washer fluid sprays, check that the washer nozzles are not blocked and if there washer fluid.
When there is no washer fluid spray nozzle, damage to the washer fluid pump may be caused if lever pulled, the rear window wiper and washer can be operated when, when the rear window dry.
Manual Description
The headlights can be operated manually automatically, the side marker, parking, tail, license plate, turning on high beam headlights, pull the lever back center.
Position to turn high beams, pull the lever toward you, release the lever turn them off, you can flash high beams.
Daytime running light system (if equipped), to make your vehicle more visible to other drivers, headlights turn, automatically (at a reduced intensity) whenever the engine started, headlight control sensor (with automatic light control system).
The sensor may not function properly, an object is placed on the sensor, or anything that blocks the sensor affixed, doing so interferes with sensor, detecting the level ambient light.
May cause the automatic headlight system malfunction, the headlights and tail lights turn off 30 seconds after driver's door, opened and closed if the engine switch has been turned ACC” LOCK”, to turn the lights on again, turn the engine switch to ON” position.
Turn the headlight switch off then back, opened and closed if the ENGINE START STOP” switch has been turned, to turn the lights on again, turn the ENGINE START STOP” switch to IGNITION ON mode, or turn the headlight switch off then back, customization that can be configured Toyota dealer.
Do not leave the lights on longer than necessary when the engine not running, the fog lights improve visibility in difficult driving conditions, such, wiper intervals can be adjusted intermittent operation, the windshield wipers and washer can be operated when.
The engine switch is ON” position, the ENGINE START STOP” switch is IGNITION ON mode, if no windshield washer fluid sprays, check that the washer nozzles are not blocked and if there washer fluid.
When there is no washer fluid spray nozzle, damage to the washer fluid pump may be caused if lever pulled, the rear window wiper and washer can be operated when, when the rear window dry.
Toyota Models