2015 Toyota Prius V - Operating the lights and wipers (18 pages)
Download Operating the lights and wipers
Manual Description
The headlights can be operated manually automatically, the side marker, parking, tail, license plate, (except daytime running lights) turn on, turning on high beam headlights.
The lever away you turn, pull the lever toward you, you can flash the high beams with the headlights off, ● To make your vehicle more visible to other drivers, daytime running.
Lights turn on automatically (at a reduced intensity) whenever the hybrid system is started and the parking brake is released, ● Compared to turning on the headlights, the daytime running light system, offers greater durability and consumes less electricity, so it can help improve, headlight control sensor (if equipped).
The sensor may not function properly an, object is placed on sensor, anything, that blocks the sensor affixed, doing so interferes with sensor.
Detecting the level ambient light, may cause the automatic headlight system malfunction, air conditioning operation may also be, ● When the headlights come on: The headlights and tail lights turn off 30 seconds after a door is opened and closed if the power switch turned.
The key is pressed after all doors locked, ● When only the tail lights come on: The tail lights turn off automatically, power switch is turned to ACCESSORY mode or turned off driver's, to turn the lights on again, turn the power switch to ON mode, turn light.
Switch off once then back, automatic headlight leveling system (if equipped), the level of the headlights is automatically adjusted according number, of passengers and the loading condition of the vehicle ensure that.
Headlights do not interfere with other road users, to prevent 12-volt battery discharge, do not leave the lights on longer than necessary when hybrid system, the Automatic High Beam uses an in-vehicle camera sensor.
Assess the brightness of streetlights, the lights oncoming, activating the Automatic High Beam system, push the lever away you, the Automatic High Beam indicator will come on when the headlights turned automatically.
High beam automatic turning off conditions, when all of the following conditions are fulfilled, high beam will be, automatically turned on (after approximately 1 second), ● Vehicle speed is above approximately 21 mph (34 km/h).
● The area ahead of vehicle dark, ● There are no oncoming or preceding vehicles with headlights tail, ● There are few streetlights road ahead, ● Vehicle speed drops below approximately 17 mph (27 km/h).
● The area ahead of the vehicle not dark, ● Oncoming or preceding vehicles have headlights tail lights, ● There are many streetlights road ahead, turning the high beam on/off manually.
Pull the lever original position, the Automatic High Beam indicator will turn off, the Automatic High Beam indicator will turn off high, the Automatic High Beam can be operated when.
The power switch ON mode, ● High beam may not be automatically turned off following situations, when oncoming vehicles suddenly appear curve.
Manual Description
The headlights can be operated manually automatically, the side marker, parking, tail, license plate, (except daytime running lights) turn on, turning on high beam headlights.
The lever away you turn, pull the lever toward you, you can flash the high beams with the headlights off, ● To make your vehicle more visible to other drivers, daytime running.
Lights turn on automatically (at a reduced intensity) whenever the hybrid system is started and the parking brake is released, ● Compared to turning on the headlights, the daytime running light system, offers greater durability and consumes less electricity, so it can help improve, headlight control sensor (if equipped).
The sensor may not function properly an, object is placed on sensor, anything, that blocks the sensor affixed, doing so interferes with sensor.
Detecting the level ambient light, may cause the automatic headlight system malfunction, air conditioning operation may also be, ● When the headlights come on: The headlights and tail lights turn off 30 seconds after a door is opened and closed if the power switch turned.
The key is pressed after all doors locked, ● When only the tail lights come on: The tail lights turn off automatically, power switch is turned to ACCESSORY mode or turned off driver's, to turn the lights on again, turn the power switch to ON mode, turn light.
Switch off once then back, automatic headlight leveling system (if equipped), the level of the headlights is automatically adjusted according number, of passengers and the loading condition of the vehicle ensure that.
Headlights do not interfere with other road users, to prevent 12-volt battery discharge, do not leave the lights on longer than necessary when hybrid system, the Automatic High Beam uses an in-vehicle camera sensor.
Assess the brightness of streetlights, the lights oncoming, activating the Automatic High Beam system, push the lever away you, the Automatic High Beam indicator will come on when the headlights turned automatically.
High beam automatic turning off conditions, when all of the following conditions are fulfilled, high beam will be, automatically turned on (after approximately 1 second), ● Vehicle speed is above approximately 21 mph (34 km/h).
● The area ahead of vehicle dark, ● There are no oncoming or preceding vehicles with headlights tail, ● There are few streetlights road ahead, ● Vehicle speed drops below approximately 17 mph (27 km/h).
● The area ahead of the vehicle not dark, ● Oncoming or preceding vehicles have headlights tail lights, ● There are many streetlights road ahead, turning the high beam on/off manually.
Pull the lever original position, the Automatic High Beam indicator will turn off, the Automatic High Beam indicator will turn off high, the Automatic High Beam can be operated when.
The power switch ON mode, ● High beam may not be automatically turned off following situations, when oncoming vehicles suddenly appear curve.
Toyota Models