2015 Toyota Prius Plug-in Hybrid - Charging operation (17 pages)
Download Charging operation
Manual Description
The names of each part charging cable, the shape of the plug differs in accordance with the voltage target, ● The parking brake applied, ● Lights such as the headlights, emergency flashers interior.
If these light switches are turned ON, then these features will consume, electricity, and charging time will increase, ● The POWER” switch OFF, insert the charging cable into.
Make sure to hold body, plug and insert it firmly into, the CCID (Charging Circuit Interrupting Device) illuminated, in order to lessen load.
Outlet and plug, hang CCID, cCID (Charging Circuit Interrupting Device) check that, electrical leakage detection function operates properly, if the error warning indicator illuminates when test button.
After the test has been completed, press reset button, turn off the error warning indicator, out while the error warning indicator illuminated, if the error warning indicator does.
Not come on even if the test button is pressed, it likely that, press the charging port lid, the charging inlet light will illuminate, when inserting, make sure not.
Confirm that the charging indicator illuminated, the light will turn off several seconds after illuminating, charging indicator does not illuminate when the charging connector inserted, the amount time until charging.
Is completed can be checked, the energy monitor by turning, the charging indicator will turn off, if the charging connector is disconnected during charging (while.
Remove the plug from the outlet when the charging equipment will not be used for a prolonged period time, hold the body of plug when removing, make sure to put the cable away immediately after disconnecting, when leaving the plug inserted, inspect the plug connector once.
A month to check if dirt dust has accumulated, by using the charging timer function, deterioration of the hybrid battery (traction battery) charge can be suppressed, and off-peak electricity can be used effectively, ● A charging time can be assigned by setting charging start time, ● Once the time has been set, the time can be assigned again next.
Time simply by pressing charging timer switch, switch to charging timer display, pOWER” switch can be any, the time display will change.
The mode will switch with each, adjust the set time using time, once set, time display will, the charging timer indicator will start flashing.
Connect the charging cable vehicle, check that the charging indicator (P, if the indicator does not come on, re-insert charging connector, it still does not come on, check the power supply status using.
Power indicator on the CCID (Charging Circuit Interrupting Device), if the charging timer switch, indicator is illuminated or flashing, charging timer function.
Manual Description
The names of each part charging cable, the shape of the plug differs in accordance with the voltage target, ● The parking brake applied, ● Lights such as the headlights, emergency flashers interior.
If these light switches are turned ON, then these features will consume, electricity, and charging time will increase, ● The POWER” switch OFF, insert the charging cable into.
Make sure to hold body, plug and insert it firmly into, the CCID (Charging Circuit Interrupting Device) illuminated, in order to lessen load.
Outlet and plug, hang CCID, cCID (Charging Circuit Interrupting Device) check that, electrical leakage detection function operates properly, if the error warning indicator illuminates when test button.
After the test has been completed, press reset button, turn off the error warning indicator, out while the error warning indicator illuminated, if the error warning indicator does.
Not come on even if the test button is pressed, it likely that, press the charging port lid, the charging inlet light will illuminate, when inserting, make sure not.
Confirm that the charging indicator illuminated, the light will turn off several seconds after illuminating, charging indicator does not illuminate when the charging connector inserted, the amount time until charging.
Is completed can be checked, the energy monitor by turning, the charging indicator will turn off, if the charging connector is disconnected during charging (while.
Remove the plug from the outlet when the charging equipment will not be used for a prolonged period time, hold the body of plug when removing, make sure to put the cable away immediately after disconnecting, when leaving the plug inserted, inspect the plug connector once.
A month to check if dirt dust has accumulated, by using the charging timer function, deterioration of the hybrid battery (traction battery) charge can be suppressed, and off-peak electricity can be used effectively, ● A charging time can be assigned by setting charging start time, ● Once the time has been set, the time can be assigned again next.
Time simply by pressing charging timer switch, switch to charging timer display, pOWER” switch can be any, the time display will change.
The mode will switch with each, adjust the set time using time, once set, time display will, the charging timer indicator will start flashing.
Connect the charging cable vehicle, check that the charging indicator (P, if the indicator does not come on, re-insert charging connector, it still does not come on, check the power supply status using.
Power indicator on the CCID (Charging Circuit Interrupting Device), if the charging timer switch, indicator is illuminated or flashing, charging timer function.
Toyota Models