2015 Toyota Prius C - Cruise control* (20 pages)
Download Cruise control*
Manual Description
Use the cruise control to maintain a set speed without depressing, press the button again to deactivate cruise control, and push the lever down set, to change the set speed, operate the lever until desired set speed.
Move the lever desired direction, the set speed will be increased decreased follows, fine adjustment: By approximately 1 mph (1, large adjustment: The set speed can be increased or decreased continually until lever released.
The speed setting also canceled, vehicle speed is more than approximately 25 mph (40 km/h), canceling and resuming constant speed control, cruise control can be set when.
● The shift lever D, ● Vehicle speed is above approximately 25 mph (40 km/h), accelerating after setting vehicle speed, ● Even without canceling the cruise control, the set speed can be increased.
By first accelerating the vehicle to the desired speed then pushing, lever down to set new speed, cruise control will stop maintaining the vehicle speed in any following, ● Actual vehicle speed falls more than approximately 10 mph (16 km/h) below.
At this time, the memorized set speed not retained, ● Actual vehicle speed is below approximately 25 mph (40 km/h), if CHECK CRUISE CONTROL SYSTEM” is shown multi-information display, press the ON-OFF” button once to deactivate the system, then press.
The button again reactivate system, if the cruise control speed cannot be set or if the cruise control cancels immediately after being activated, there may be a malfunction cruise control, to avoid operating the cruise control by mistake, switch the cruise control off using the ON-OFF” button when not use.
Do not use cruise control in any following situations, doing so may result in loss of control and could cause an accident resulting, ● On roads with sharp bends, ● On slippery roads, such as those covered with rain, ice snow.
Vehicle speed may exceed the set speed when driving down steep hill, the rear view monitor system assists driver by displaying, guide lines and an image of the view behind vehicle while, backing up, example while parking.
For vehicles with a navigation system, refer NAVIGATION, the screen illustrations used in this text intended examples, and may differ from the image that is actually displayed, vehicles without a smart key system: The rear view image is displayed when the shift position.
R and the engine switch, vehicles with smart key system, the rear view image displayed, when the shift position R.
The rear view monitor system will, be deactivated when shift lever, is in any position other than R, using the rear view monitor system.
The line indicates a guide path when the vehicle being backed, the displayed width is wider than actual vehicle width, the line shows distance behind the vehicle, a point approximately 1, the line shows distance behind the vehicle, a point approximately 3 ft.
M) (blue) from the edge bumper, this line indicates the estimated vehicle center ground, to adjust the image rear.
Manual Description
Use the cruise control to maintain a set speed without depressing, press the button again to deactivate cruise control, and push the lever down set, to change the set speed, operate the lever until desired set speed.
Move the lever desired direction, the set speed will be increased decreased follows, fine adjustment: By approximately 1 mph (1, large adjustment: The set speed can be increased or decreased continually until lever released.
The speed setting also canceled, vehicle speed is more than approximately 25 mph (40 km/h), canceling and resuming constant speed control, cruise control can be set when.
● The shift lever D, ● Vehicle speed is above approximately 25 mph (40 km/h), accelerating after setting vehicle speed, ● Even without canceling the cruise control, the set speed can be increased.
By first accelerating the vehicle to the desired speed then pushing, lever down to set new speed, cruise control will stop maintaining the vehicle speed in any following, ● Actual vehicle speed falls more than approximately 10 mph (16 km/h) below.
At this time, the memorized set speed not retained, ● Actual vehicle speed is below approximately 25 mph (40 km/h), if CHECK CRUISE CONTROL SYSTEM” is shown multi-information display, press the ON-OFF” button once to deactivate the system, then press.
The button again reactivate system, if the cruise control speed cannot be set or if the cruise control cancels immediately after being activated, there may be a malfunction cruise control, to avoid operating the cruise control by mistake, switch the cruise control off using the ON-OFF” button when not use.
Do not use cruise control in any following situations, doing so may result in loss of control and could cause an accident resulting, ● On roads with sharp bends, ● On slippery roads, such as those covered with rain, ice snow.
Vehicle speed may exceed the set speed when driving down steep hill, the rear view monitor system assists driver by displaying, guide lines and an image of the view behind vehicle while, backing up, example while parking.
For vehicles with a navigation system, refer NAVIGATION, the screen illustrations used in this text intended examples, and may differ from the image that is actually displayed, vehicles without a smart key system: The rear view image is displayed when the shift position.
R and the engine switch, vehicles with smart key system, the rear view image displayed, when the shift position R.
The rear view monitor system will, be deactivated when shift lever, is in any position other than R, using the rear view monitor system.
The line indicates a guide path when the vehicle being backed, the displayed width is wider than actual vehicle width, the line shows distance behind the vehicle, a point approximately 1, the line shows distance behind the vehicle, a point approximately 3 ft.
M) (blue) from the edge bumper, this line indicates the estimated vehicle center ground, to adjust the image rear.
Toyota Models