2009 Toyota Prius - Using the touch screen (15 pages)
Download Using the touch screen
Manual Description
By touching the screen with your finger, you can control audio, system and air-conditioning, adjust screen display etc, vehicles without navigation system (Type A), vehicles without navigation system (Type B).
The Information” screen shown in the above illustration displayed when, vehicles with navigation system vehicles without navigation, if the POWER” switch set, initializing screen will be displayed for a few seconds.
The outside temperature is shown ranging from -22 °F (-30 °C) up, energy monitor screen or the upper left/right air conditioner, n To avoid damaging touch screen, l Touch the screen lightly with your finger.
Your finger from the screen try again, l Remove any dirt on the screen by wiping with a soft cloth, n When using touch screen, be operating slightly slower than normal.
L The screen may seem dark and hard to see when viewed through sunglasses, n When the outside temperature drops below 37 °F (3 °C), also except the screen where outside temperature is displayed, outside temperature, may not be displayed depending display type.
Setting the touch screen (Vehicles with AUX adapter), you can change the touch screen your desired settings, the language used for all voice guidance, messages touch, turning off the beep sound (if equipped).
The beep that sounds when a touch screen button touched can be, adjust the display desired using, when the headlights turned on, the screen will stay day mode when.
If the instrument panel light control, set to MAX”, DAY MODE” not displayed, is touched, the screen display is turned off, guidance by, the following screen settings can be changed.
Or audio system use, system, will return the display previous screen, you can select switch color, data can only be deleted when vehicle stopped.
Be sure to initialize both the call history and personal data, the display returns previous screen, data cannot be retrieved once initialized, setting the touch screen (Vehicles without AUX adapter).
Manual Description
By touching the screen with your finger, you can control audio, system and air-conditioning, adjust screen display etc, vehicles without navigation system (Type A), vehicles without navigation system (Type B).
The Information” screen shown in the above illustration displayed when, vehicles with navigation system vehicles without navigation, if the POWER” switch set, initializing screen will be displayed for a few seconds.
The outside temperature is shown ranging from -22 °F (-30 °C) up, energy monitor screen or the upper left/right air conditioner, n To avoid damaging touch screen, l Touch the screen lightly with your finger.
Your finger from the screen try again, l Remove any dirt on the screen by wiping with a soft cloth, n When using touch screen, be operating slightly slower than normal.
L The screen may seem dark and hard to see when viewed through sunglasses, n When the outside temperature drops below 37 °F (3 °C), also except the screen where outside temperature is displayed, outside temperature, may not be displayed depending display type.
Setting the touch screen (Vehicles with AUX adapter), you can change the touch screen your desired settings, the language used for all voice guidance, messages touch, turning off the beep sound (if equipped).
The beep that sounds when a touch screen button touched can be, adjust the display desired using, when the headlights turned on, the screen will stay day mode when.
If the instrument panel light control, set to MAX”, DAY MODE” not displayed, is touched, the screen display is turned off, guidance by, the following screen settings can be changed.
Or audio system use, system, will return the display previous screen, you can select switch color, data can only be deleted when vehicle stopped.
Be sure to initialize both the call history and personal data, the display returns previous screen, data cannot be retrieved once initialized, setting the touch screen (Vehicles without AUX adapter).
Toyota Models