2015 Toyota Land Cruiser - Adjustable components (seats, mirrors, steering wheel) (37 pages)
Download Adjustable components (seats, mirrors, steering wheel)
Manual Description
Head restraint moves slightly forward and upward help reduce, the risk of whiplash seat, even small forces applied to the seatback may cause head restraint, ● Be careful that the seat does not hit passengers luggage.
To reduce the risk of sliding under lap belt, hips and apply restraint forces directly to the abdomen your neck may, contact the shoulder belt, increasing the risk of death serious injury, adjustments should not be made while driving as the seat may unexpectedly move and cause the driver to lose control vehicle.
Tumbling the second seats third seat entry, for easy access to third seat, perform, stow the seat belt buckles, pass the outer seat belts through.
The seat belt hangers secure, make sure that seat belts, to its original position, stow, from the back of the seat cushion, and install them seat.
If you cannot raise left side seatback, lift the seatback until it stops, lower the seatback a little then lift it, to its original position, remove.
And install them in back, before folding up third seats, stow the center head restraint in seatback, stow the center seat belt tabs in the cover set roof.
Pull the seat leg lock release, the seat will rise, and the seatback striker will also automatically, before raising, make sure that, handle on the rear of seatback secure.
Secure the seats by strikers, from the floor install them, into the back seat cushion, unlock the seats by pulling.
And lower the seats its original, fix the handle securely in its original position after use, do not recline the seat more than necessary when the vehicle motion, ● Be sure to install the seat hook covers on the seat hooks, you may get.
When returning the seatbacks their original position, ● Make sure the seats are securely locked, ● Check that the seat belts are not twisted or caught under seat, ● Arrange the seat belts in the proper positions ready use.
Do not hang or attach anything seatback striker, before tumbling, folding up seats, the seat belts and buckles must be stowed, make sure that the handle on the rear of the seatback has been secured.
Your preferred driving position (the position driver's seat, steering wheel and outside rear view mirrors) can be entered into, computer's memory and recalled with the touch of a button, possible to set this function to activate automatically when.
Three different driving positions can be entered into memory, turn the ENGINE START STOP” switch IGNITION ON, adjust the driver's seat, steering wheel, outside rear, while pressing the SET” button, or within 3 seconds after.
Press and hold button 1”, 2”, already been preset, the previously recorded position will be, check that the shift lever set P”.
Manual Description
Head restraint moves slightly forward and upward help reduce, the risk of whiplash seat, even small forces applied to the seatback may cause head restraint, ● Be careful that the seat does not hit passengers luggage.
To reduce the risk of sliding under lap belt, hips and apply restraint forces directly to the abdomen your neck may, contact the shoulder belt, increasing the risk of death serious injury, adjustments should not be made while driving as the seat may unexpectedly move and cause the driver to lose control vehicle.
Tumbling the second seats third seat entry, for easy access to third seat, perform, stow the seat belt buckles, pass the outer seat belts through.
The seat belt hangers secure, make sure that seat belts, to its original position, stow, from the back of the seat cushion, and install them seat.
If you cannot raise left side seatback, lift the seatback until it stops, lower the seatback a little then lift it, to its original position, remove.
And install them in back, before folding up third seats, stow the center head restraint in seatback, stow the center seat belt tabs in the cover set roof.
Pull the seat leg lock release, the seat will rise, and the seatback striker will also automatically, before raising, make sure that, handle on the rear of seatback secure.
Secure the seats by strikers, from the floor install them, into the back seat cushion, unlock the seats by pulling.
And lower the seats its original, fix the handle securely in its original position after use, do not recline the seat more than necessary when the vehicle motion, ● Be sure to install the seat hook covers on the seat hooks, you may get.
When returning the seatbacks their original position, ● Make sure the seats are securely locked, ● Check that the seat belts are not twisted or caught under seat, ● Arrange the seat belts in the proper positions ready use.
Do not hang or attach anything seatback striker, before tumbling, folding up seats, the seat belts and buckles must be stowed, make sure that the handle on the rear of the seatback has been secured.
Your preferred driving position (the position driver's seat, steering wheel and outside rear view mirrors) can be entered into, computer's memory and recalled with the touch of a button, possible to set this function to activate automatically when.
Three different driving positions can be entered into memory, turn the ENGINE START STOP” switch IGNITION ON, adjust the driver's seat, steering wheel, outside rear, while pressing the SET” button, or within 3 seconds after.
Press and hold button 1”, 2”, already been preset, the previously recorded position will be, check that the shift lever set P”.
Toyota Models