2013 Toyota Highlander - Do-It-Yourself Maintenance (66 pages)

Model: 2013 Toyota Highlander
File size: 3.46 MB
Pages: 66 pages



Download Do-It-Yourself Maintenance

Manual Description
If you perform maintenance yourself, be sure follow correct, procedures as given these sections, toyota Super Long Life Coolant”, glycol based non-silicate, nonamine, non-nitrite non-borate.

Fuse with same amperage rating, the engine compartment contains many mechanisms fluids that may, move suddenly, become hot, or become electrically energized, or serious injury observe following precautions.

● Keep hands, clothing, and tools away from the moving fan engine, after driving as they may be hot, ● Do not leave anything that may burn easily, such as paper rags, ● Do not smoke, cause sparks or expose an open flame to fuel or the battery.

● Be extremely cautious when working on the battery, if you still experience discomfort, see doctor, vehicles without smart key system: The electric cooling fan may keep, rotating for about 3 minutes even after the engine switch turned.

With the engine switch in the ON” position, the electric cooling fan may, automatically start to run if the air conditioning is and/or coolant, when working near the electric cooling fan radiator grille, vehicles with smart key system: The electric cooling fan may keep rotating.

For about minutes even after the ENGINE START STOP” switch OFF, with the ENGINE START STOP” switch in IGNITION ON mode, the electric cooling fan may automatically start to run if the air conditioning, and/or the coolant temperature is high, sTOP” switch is OFF when working near the electric cooling fan radiator grille.

● Take care because brake fluid can harm your hands eyes damage, if fluid gets on your hands or in your eyes, flush affected area with, wear safety glasses to prevent flying or falling material, fluid spray, etc, driving with the air cleaner filter removed may cause excessive engine wear.

Release the lock from the inside of the vehicle open hood, the hood will pop up slightly, hold the hood open by inserting supporting rod into, check that the hood is fully closed locked.

And cause an accident, which may result in death serious injury, after installing the support rod into slot, make sure the rod supports the hood securely from falling down your, be sure to return the support rod to its clip before closing hood.

The hood with the support rod up could cause hood bend, when raising your vehicle with a floor jack, position the jack correctly, removing the front jack point cover (3, before jacking up the vehicle, remove jack point cover.

Make sure to observe the following to reduce the possibility of death serious injury, ● Lift up the vehicle using floor jack, such as the one shown illustration, ● When using a floor jack, follow the instructions of manual provided with.

● Stop the vehicle on level firm ground, firmly set the parking brake shift, ● Make sure to set the floor jack properly jack point, raising the vehicle with an improperly positioned floor jack will damage, the vehicle and may cause the vehicle to fall off floor jack.

● When raising the vehicle, do not place any objects on top underneath, ● Always use floor jack and/or automotive jack stands on solid, flat, level, front jack point cover (3, ● Before jacking up your vehicles, remove the front jack point cover.

● After installing the front jack point cover, make sure it is securely its original position, after installing an engine compartment cover, make sure that the cover is securely installed its original position.