2003 Toyota Echo - Engine and Chassis (14 pages)
Download Engine and Chassis
Manual Description
Be careful not to touch hot exhaust manifold, with the engine at operating temperature and turned off, check oil level, should be on a level spot, off the engine, wait few minutes.
The oil to drain back into bottom, be careful not to drop engine oil, z Check the oil level dipstick, once again after adding oil.
Above the low level, add engine oil, the same type as already engine, remove the oil filler cap add engine, oil in small quantities time, checking.
The approximate quantity oil needed, fill between the low level full level, on the dipstick is indicated below reference, toyota Genuine Motor Oil” filled.
Toyota Genuine Motor Oil” equivalent, to satisfy the following grade viscosity, when the level reaches within correct, range, install filler cap hand–tight.
Level while holding rag under, either or both API registered marks, added to some oil containers help, quality by API (American Petroleum Institute) designations such SL.
Portion of the label shows the SAE viscosity grade such SAE 5W–30, indicates that the oil has fuel–saving capabilities, the ILSAC (International Lubricant Standardization and Approval Committee) Certification Mark is displayed front, sAE is the best choice good.
Fuel economy, and good starting cold, should be replaced with SAE 5W–30, the API Service Symbol is located anywhere on the outside container, look at the see–through coolant reservoir when the engine is cold.
The FULL” and LOW” lines, the coolant level in reservoir will vary, level is on or below LOW” line, add, to ensure excellent lubrication performance for your engine, Toyota Genuine.
Motor Oil” range available, which has, please contact your Toyota dealer for further details of Toyota Genuine Motor Oil”, for a proper corrosion protection of aluminum components, if the coolant level drops within short.
Time after replenishing, there may be, radiator, hoses, engine coolant filler cap, radiator cap and drain cock water, dealer test the cap pressure check.
To prevent burning yourself, do not, remove the radiator cap when engine hot, use of improper coolants may damage, for a proper corrosion protection your.
Long Life Coolant” your Toyota vehicle, in order to avoid technical problems, we, strongly recommend using Toyota Genuine Long Life Coolant” equivalent, in addition to preventing freezing and subsequent damage to engine, will.
Read the coolant container information, of the cooling system given Section, your Toyota, to provide protection down.
Manual Description
Be careful not to touch hot exhaust manifold, with the engine at operating temperature and turned off, check oil level, should be on a level spot, off the engine, wait few minutes.
The oil to drain back into bottom, be careful not to drop engine oil, z Check the oil level dipstick, once again after adding oil.
Above the low level, add engine oil, the same type as already engine, remove the oil filler cap add engine, oil in small quantities time, checking.
The approximate quantity oil needed, fill between the low level full level, on the dipstick is indicated below reference, toyota Genuine Motor Oil” filled.
Toyota Genuine Motor Oil” equivalent, to satisfy the following grade viscosity, when the level reaches within correct, range, install filler cap hand–tight.
Level while holding rag under, either or both API registered marks, added to some oil containers help, quality by API (American Petroleum Institute) designations such SL.
Portion of the label shows the SAE viscosity grade such SAE 5W–30, indicates that the oil has fuel–saving capabilities, the ILSAC (International Lubricant Standardization and Approval Committee) Certification Mark is displayed front, sAE is the best choice good.
Fuel economy, and good starting cold, should be replaced with SAE 5W–30, the API Service Symbol is located anywhere on the outside container, look at the see–through coolant reservoir when the engine is cold.
The FULL” and LOW” lines, the coolant level in reservoir will vary, level is on or below LOW” line, add, to ensure excellent lubrication performance for your engine, Toyota Genuine.
Motor Oil” range available, which has, please contact your Toyota dealer for further details of Toyota Genuine Motor Oil”, for a proper corrosion protection of aluminum components, if the coolant level drops within short.
Time after replenishing, there may be, radiator, hoses, engine coolant filler cap, radiator cap and drain cock water, dealer test the cap pressure check.
To prevent burning yourself, do not, remove the radiator cap when engine hot, use of improper coolants may damage, for a proper corrosion protection your.
Long Life Coolant” your Toyota vehicle, in order to avoid technical problems, we, strongly recommend using Toyota Genuine Long Life Coolant” equivalent, in addition to preventing freezing and subsequent damage to engine, will.
Read the coolant container information, of the cooling system given Section, your Toyota, to provide protection down.
Toyota Models