2014 Toyota Corolla - Fuel information (26 pages)

Model: 2014 Toyota Corolla
File size: 0.38 MB
Pages: 26 pages



Download Fuel information

Manual Description
Maintenance data (fuel, oil level, etc, the vehicle identification number (VIN) is legal identifier, this number is also on the Certification Label driver's side, the engine number is stamped on the engine block shown.

Cylinder in line, 4 cycle, gasoline, *: Drive belt tension measured with Borroughs drive belt tension gauge No, (Research Octane Number 91) higher, *: The engine oil capacity is a reference quantity to be used when changing.

And check the oil level dipstick, toyota Genuine Motor Oil” is used in your Toyota vehicle, toyota approved Toyota Genuine Motor Oil” or equivalent to satisfy the following grade viscosity, oil grade: ILSAC GF-5 multigrade engine oil.

Good fuel economy and good starting cold weather, it must be replaced with SAE 0W20 at next oil change, oil viscosity is explained here an example), value) may be better suited if the vehicle is operated high speeds.

How to read oil container label, the International Lubricant Specification Advisory Committee, (ILSAC) Certification Mark is added to some oil containers help, toyota Super Long Life Coolant”.

Non-silicate, non-amine, non-nitrite, and nonborate coolant with long-life hybrid organic, (Voltage checked minutes after engine, and all lights turned off), other gear oil that meets API GL-4 SAE.

Please be aware that depending on the particular characteristics gear, oil used or the operating conditions, idle sound, shift feeling and/or fuel efficiency may be different or affected, genuine Manual Transmission Gear Oil LV” achieve optimal performance, using automatic transmission fluid other than Toyota Genuine ATF WS”.

May cause deterioration in shift quality, locking up your transmission, accompanied by vibration, and ultimately damage transmission your, *: The fluid capacity reference quantity, if replacement is necessary, contact your Toyota dealer.

Continuously variable transaxle fluid type, using continuously variable transaxle fluid other than Toyota Genuine, cVTF FE” may cause deterioration in shift quality, locking up of the transmission accompanied by vibration and, ultimately, damage vehicle's, minimum pedal clearance when depressed with a force of 66 lbf (294 N, 30.

: Parking brake lever travel when pulled up with a force of 44 lbf (200 N, 20, front: psi (240 kPa, 2, (Recommended cold tire Rear: 35 psi (240 kPa, 2, spare: psi (420 kPa, 4.

Front: psi (220 kPa, 2, (Recommended cold tire Rear: 32 psi (220 kPa, 2, you must only use unleaded gasoline your vehicle, select octane rating 87 (Research Octane Number 91) higher.

Use of unleaded gasoline with an octane rating lower than 87, at minimum, the gasoline you use should meet specifications, fuel tank opening unleaded gasoline, to help prevent incorrect fueling, your vehicle has a fuel tank opening that.

Only accommodates the special nozzle unleaded fuel pumps, in very few cases, driveability problems may be caused by the brand of gasoline you are using, ● Automotive manufacturers in the U, a specification for fuel quality called the World-Wide Fuel Charter (WWFC).

Which is expected be applied worldwide, ● The WWFC consists of four categories that are based required emission, ● The WWFC improves air quality by lowering emissions vehicle fleets.