2014 Toyota Camry - Specifications (29 pages)
Download Specifications
Manual Description
Maintenance data (fuel, oil level, etc, the vehicle identification number (VIN) is the legal identifier your, used in registering the ownership your vehicle, this number is also Certification Label.
The engine number is stamped on the engine block shown, the high strength drive belt is used for the generator side drive belt, when replacing the drive belt, use Toyota genuine drive belt equivalent, of the belt may become less than expected.
Belt with Aramid core which has higher strength compared to usually available belts with PET PEN core, (Research Octane Number 91) higher, *: The engine oil capacity is a reference quantity to be used when changing, check the oil level dipstick.
Toyota Genuine Motor Oil” is used in your Toyota vehicle, toyota approved Toyota Genuine Motor Oil” equivalent satisfy, oil grade: ILSAC GF-5 multigrade engine oil, oil viscosity is explained here an example).
Starting of the engine cold weather, higher value) may be better suited if the vehicle operated high, speeds, or under extreme load conditions, how to read oil container label.
The International Lubricant Specification Advisory Committee, (ILSAC) Certification Mark is added to some oil containers help, toyota Super Long Life Coolant”, a similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, non-borate coolant.
With long-life hybrid organic acid technology, do not use plain water alone, (*: Voltage checked 20 minutes after, engine and all the lights turned off).
*: The fluid capacity is a reference quantity, using transmission fluid other than Toyota Genuine ATF WS” may cause, deterioration in shift quality, locking up of transmission accompanied by, vibration and, ultimately, damage vehicle's transmission.
Minimum pedal clearance when depressed with a force of 112 lbf (500 N, parking brake pedal travel when depressed with a force of 67 lbf (300 N, 31, front: psi (240 kPa, 2, rear: psi (240 kPa, 2.
Driving at high speeds (above 100 mph, km/h]) (in countries where such, the front tires rear tires, exceed the maximum cold tire inflation.
Front: psi (230 kPa, 2, rear: psi (230 kPa, 2, you must only use unleaded gasoline your vehicle, select octane rating 87 (Research Octane Number 91) higher.
Use of unleaded gasoline with an octane rating lower than 87 may, at minimum, the gasoline you use should meet specifications, of ASTM in the U, fuel tank opening unleaded gasoline.
To help prevent incorrect fueling, your vehicle has a fuel tank opening that, only accommodates the special nozzle unleaded fuel pumps, in very few cases, driveability problems may be caused by the brand of gasoline you are using, ● Automotive manufacturers in the U.
(WWFC), which is expected be applied worldwide, ● The WWFC consists of four categories that are based on required emission levels, ● The WWFC improves air quality by lowering emissions vehicle fleets.
Manual Description
Maintenance data (fuel, oil level, etc, the vehicle identification number (VIN) is the legal identifier your, used in registering the ownership your vehicle, this number is also Certification Label.
The engine number is stamped on the engine block shown, the high strength drive belt is used for the generator side drive belt, when replacing the drive belt, use Toyota genuine drive belt equivalent, of the belt may become less than expected.
Belt with Aramid core which has higher strength compared to usually available belts with PET PEN core, (Research Octane Number 91) higher, *: The engine oil capacity is a reference quantity to be used when changing, check the oil level dipstick.
Toyota Genuine Motor Oil” is used in your Toyota vehicle, toyota approved Toyota Genuine Motor Oil” equivalent satisfy, oil grade: ILSAC GF-5 multigrade engine oil, oil viscosity is explained here an example).
Starting of the engine cold weather, higher value) may be better suited if the vehicle operated high, speeds, or under extreme load conditions, how to read oil container label.
The International Lubricant Specification Advisory Committee, (ILSAC) Certification Mark is added to some oil containers help, toyota Super Long Life Coolant”, a similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, non-borate coolant.
With long-life hybrid organic acid technology, do not use plain water alone, (*: Voltage checked 20 minutes after, engine and all the lights turned off).
*: The fluid capacity is a reference quantity, using transmission fluid other than Toyota Genuine ATF WS” may cause, deterioration in shift quality, locking up of transmission accompanied by, vibration and, ultimately, damage vehicle's transmission.
Minimum pedal clearance when depressed with a force of 112 lbf (500 N, parking brake pedal travel when depressed with a force of 67 lbf (300 N, 31, front: psi (240 kPa, 2, rear: psi (240 kPa, 2.
Driving at high speeds (above 100 mph, km/h]) (in countries where such, the front tires rear tires, exceed the maximum cold tire inflation.
Front: psi (230 kPa, 2, rear: psi (230 kPa, 2, you must only use unleaded gasoline your vehicle, select octane rating 87 (Research Octane Number 91) higher.
Use of unleaded gasoline with an octane rating lower than 87 may, at minimum, the gasoline you use should meet specifications, of ASTM in the U, fuel tank opening unleaded gasoline.
To help prevent incorrect fueling, your vehicle has a fuel tank opening that, only accommodates the special nozzle unleaded fuel pumps, in very few cases, driveability problems may be caused by the brand of gasoline you are using, ● Automotive manufacturers in the U.
(WWFC), which is expected be applied worldwide, ● The WWFC consists of four categories that are based on required emission levels, ● The WWFC improves air quality by lowering emissions vehicle fleets.
Toyota Models