2013 Toyota 4Runner - Operating the lights and wipers (14 pages)
Download Operating the lights and wipers
Manual Description
The headlights can be operated manually automatically, the daytime running lights turn on, the daytime running lights turn off, switch is IGNITION ON mode).
Turning on high beam headlights, pull the lever toward you, you can flash high beams, ● To make your vehicle more visible to other drivers, daytime running.
Lights turn on automatically whenever the engine is started and the parking brake is released, type A and B: Daytime running lights can be turned off by operating, ● Compared to turning on the headlights, the daytime running light system, offers greater durability and consumes less electricity, so it can help.
Headlight control sensor (if equipped), the sensor may not function properly, an object is placed on the sensor, or anything that blocks the sensor affixed, doing so interferes with sensor.
Detecting the level ambient light, may cause the automatic headlight system malfunction, vehicles without smart key system, ● When the headlights come on: The headlights and tail lights turn off 30.
Seconds after a door is opened and closed if the engine switch turned, to the ACC” or LOCK” position, ● When only the tail lights come on: The tail lights turn off automatically, the engine switch is turned to the ACC” or LOCK” position.
To turn the lights on again, turn the engine switch to ON” position, turn the lights off then back, vehicles with smart key system, seconds after a door is opened and closed ENGINE START.
STOP” switch is turned to ACCESSORY mode or turned off, the ENGINE START STOP” switch is turned off and driver's door, to turn the lights on again, turn the ENGINE START STOP” switch to IGNITION ON mode, or turn the light switch off then back, customization that can be configured Toyota dealer.
Do not leave the lights on longer than necessary when the engine not running, the fog lights secure excellent visibility in difficult driving conditions, such as rain fog, when intermittent windshield wiper operation selected, wiper, the wiper operation is selected by moving lever follows.
Operate a couple times after, vehicles without a smart key system: The engine switch is ON” position, vehicles with a smart key system: The ENGINE START STOP” switch, if no windshield washer fluid sprays.
Check that the washer nozzles are not blocked if there is washer fluid, when the washer fluid tank empty, do not operate the switch continually as the washer fluid pump may overheat, the windshield wipers and washer can be operated when.
Before operating the rear window wiper washer switch, make, sure the back window is completely closed, time after a short delay prevent dripping, the rear window wiper and washer can be operated when.
● Vehicles without a smart key system: The engine switch ON”, ● The back window completely closed, ● When intermittent window wiper operation mode selected, wiper, will operate a couple of times and then switch intermittent operation.
● During intermittent operation, the wiper stops temporarily reversing, when the rear window wiper and washer switch turned off, the rear wiper will stop operation, and return to retracted position after.
Manual Description
The headlights can be operated manually automatically, the daytime running lights turn on, the daytime running lights turn off, switch is IGNITION ON mode).
Turning on high beam headlights, pull the lever toward you, you can flash high beams, ● To make your vehicle more visible to other drivers, daytime running.
Lights turn on automatically whenever the engine is started and the parking brake is released, type A and B: Daytime running lights can be turned off by operating, ● Compared to turning on the headlights, the daytime running light system, offers greater durability and consumes less electricity, so it can help.
Headlight control sensor (if equipped), the sensor may not function properly, an object is placed on the sensor, or anything that blocks the sensor affixed, doing so interferes with sensor.
Detecting the level ambient light, may cause the automatic headlight system malfunction, vehicles without smart key system, ● When the headlights come on: The headlights and tail lights turn off 30.
Seconds after a door is opened and closed if the engine switch turned, to the ACC” or LOCK” position, ● When only the tail lights come on: The tail lights turn off automatically, the engine switch is turned to the ACC” or LOCK” position.
To turn the lights on again, turn the engine switch to ON” position, turn the lights off then back, vehicles with smart key system, seconds after a door is opened and closed ENGINE START.
STOP” switch is turned to ACCESSORY mode or turned off, the ENGINE START STOP” switch is turned off and driver's door, to turn the lights on again, turn the ENGINE START STOP” switch to IGNITION ON mode, or turn the light switch off then back, customization that can be configured Toyota dealer.
Do not leave the lights on longer than necessary when the engine not running, the fog lights secure excellent visibility in difficult driving conditions, such as rain fog, when intermittent windshield wiper operation selected, wiper, the wiper operation is selected by moving lever follows.
Operate a couple times after, vehicles without a smart key system: The engine switch is ON” position, vehicles with a smart key system: The ENGINE START STOP” switch, if no windshield washer fluid sprays.
Check that the washer nozzles are not blocked if there is washer fluid, when the washer fluid tank empty, do not operate the switch continually as the washer fluid pump may overheat, the windshield wipers and washer can be operated when.
Before operating the rear window wiper washer switch, make, sure the back window is completely closed, time after a short delay prevent dripping, the rear window wiper and washer can be operated when.
● Vehicles without a smart key system: The engine switch ON”, ● The back window completely closed, ● When intermittent window wiper operation mode selected, wiper, will operate a couple of times and then switch intermittent operation.
● During intermittent operation, the wiper stops temporarily reversing, when the rear window wiper and washer switch turned off, the rear wiper will stop operation, and return to retracted position after.
Toyota Models