2014 Subaru Outback - Lane Departure Warning (3 pages)
Download Lane Departure Warning
Manual Description
When vehicle speed is approximately 32 MPH (50 km/h) or more, function warns, driver if the system detects that the vehicle is likely to depart traffic lane, when Lane Departure Warning activates, a buzzer sounds 6 short beeps, steering, wheel indicator and right/left lane indicators on the multi information display all flash.
The Lane Departure Warning will activate at a faster rate than usual if lane sway was not, avoided after warning buzzer activated, * Models for Canada: Metric units used, lane Departure Warning will not operate in all conditions.
Lane Departure Warning to keep the vehicle in the lane, lane departure may, the Lane Departure Warning activates when it detects lane markings, in the following situations, the Lane Departure Warning will may not activate, vehicle speed is approximately 32 MPH (50 km/h) less.
For approximately 7 seconds after the Lane Departure Warning activates, when the steering wheel is turned significantly either side, when the brake pedal is depressed or immediately after it depressed, when the accelerator pedal is almost fully depressed vehicle.
When the following distance behind a vehicle front short, while the turn signal is operating and for approximately 7 seconds after, turn signal lever has returned its original position, when the vehicle has not returned to the inside of the lane after Lane.
When it is difficult for the camera detect lane markings, - There are no lane markings (white lines, etc, - The lane markings narrow, when the lead vehicle has taken measures to avoid an obstacle and following this you have performed steering operations.
The following situations may cause incorrect lane detection faulty, - Tire tracks on a wet road snow-covered road, - Boundaries between snow and asphalt, marks road repair, etc, when the Lane Departure Warning OFF indicator light illuminated.
Press and hold the Lane Departure Warning OFF switch for approximately 2 seconds, longer to turn off the Lane Departure Warning, departure Warning OFF indicator light on the instrument panel will illuminate, to turn the function back on, press and hold the Lane Departure Warning OFF switch again.
For approximately seconds or longer, warning OFF indicator light turns off, when the Lane Departure Warning is turned off, the Lane Sway Warning, even when the Lane Departure Warning is turned off, ignition switch.
Is turned off and then the engine is restarted, Lane Departure Warning, lane Departure Warning OFF indicator light, this indicator illuminates when ignition, switch is turned to the ON position, then.
Starts, it turns off depending current, it also illuminates under following, when the EyeSight system has, when the EyeSight system has stopped.
Manual Description
When vehicle speed is approximately 32 MPH (50 km/h) or more, function warns, driver if the system detects that the vehicle is likely to depart traffic lane, when Lane Departure Warning activates, a buzzer sounds 6 short beeps, steering, wheel indicator and right/left lane indicators on the multi information display all flash.
The Lane Departure Warning will activate at a faster rate than usual if lane sway was not, avoided after warning buzzer activated, * Models for Canada: Metric units used, lane Departure Warning will not operate in all conditions.
Lane Departure Warning to keep the vehicle in the lane, lane departure may, the Lane Departure Warning activates when it detects lane markings, in the following situations, the Lane Departure Warning will may not activate, vehicle speed is approximately 32 MPH (50 km/h) less.
For approximately 7 seconds after the Lane Departure Warning activates, when the steering wheel is turned significantly either side, when the brake pedal is depressed or immediately after it depressed, when the accelerator pedal is almost fully depressed vehicle.
When the following distance behind a vehicle front short, while the turn signal is operating and for approximately 7 seconds after, turn signal lever has returned its original position, when the vehicle has not returned to the inside of the lane after Lane.
When it is difficult for the camera detect lane markings, - There are no lane markings (white lines, etc, - The lane markings narrow, when the lead vehicle has taken measures to avoid an obstacle and following this you have performed steering operations.
The following situations may cause incorrect lane detection faulty, - Tire tracks on a wet road snow-covered road, - Boundaries between snow and asphalt, marks road repair, etc, when the Lane Departure Warning OFF indicator light illuminated.
Press and hold the Lane Departure Warning OFF switch for approximately 2 seconds, longer to turn off the Lane Departure Warning, departure Warning OFF indicator light on the instrument panel will illuminate, to turn the function back on, press and hold the Lane Departure Warning OFF switch again.
For approximately seconds or longer, warning OFF indicator light turns off, when the Lane Departure Warning is turned off, the Lane Sway Warning, even when the Lane Departure Warning is turned off, ignition switch.
Is turned off and then the engine is restarted, Lane Departure Warning, lane Departure Warning OFF indicator light, this indicator illuminates when ignition, switch is turned to the ON position, then.
Starts, it turns off depending current, it also illuminates under following, when the EyeSight system has, when the EyeSight system has stopped.
Subaru Models