2013 Subaru Impreza - 3. Instruments and controls (82 pages)

Model: 2013 Subaru Impreza
File size: 22.48 MB
Pages: 82 pages



Download 3. Instruments and controls

Manual Description
Canceling the function meter/gauge needle, front passenger's frontal airbag ON OFF, engine low oil level warning light, aT OIL TEMP warning light (CVT models).

Low tire pressure warning light (U, hill start assist warning light/Hill start assist OFF, all-Wheel Drive warning light (CVT models), vehicle Dynamics Control OFF indicator light.

Cruise control indicator light (if equipped), automatic headlight beam leveler warning light, front fog light indicator light (if equipped), 北米Model EDITED: 2012/ 6/ 20.

Automatic headlight beam leveler (models with, rear window wiper washer switch –, that will lock steering wheel, when the engine turned off, it.

Takes a much greater effort than, the power windows, the moonroof or other controls even, tion to the ACC” or LOCK” position, thereby stopping engine, keyholder or to large bunch.

Other keys, centrifugal force may act, from the LOCK” position ACC”, slightly to the left and right you turn, the steering wheel when you remove.

Steering wheel slightly to right left, the ignition switch has four positions, do not attach a large key holder, against your knees hands while.

You are driving, it could turn, long time with the ignition switch, oN” or ACC” position can cause, lOCK” position only when select.

Lever is in the P” position (CVT models), the engine may not start following cases, in this position electrical accessories, the reminder chime sounds when.

Driver's door is opened ignition, switch is in the LOCK” ACC” position, this is the normal operating position after, the engine is started position.

Starter cranks the engine start it, the key is released (after engine has, started), the key automatically returns, the chime stops under following.

For easy access to ignition switch, the dark, the ignition switch light illuminates when the driver's door opened, when the driver's door unlocked using, do not turn the ignition switch.

If your registered key fails start, engine, pull out the key once (the security, indicator light will blink), then insert, the START” position and again try start.

The light remains illuminated several, tens of seconds then gradually turns, the light turns off immediately under.