Download Owner's Manual
Manual DescriptionAdjust seat backrest inclination as far as necessary to a vertical position to ensure that the belt is tight on the buckle side. There must not be any objects on the bicycles that could become loose during transportation. Push the clamping lever down and push the lamp support into the retainer until it engages.
Check the cable and lamp position to ensure these are correctly installed and are securely located. The rear carrier system is locked when the clamping levers are swivelled by approx. Place the wheel recesses such that the bicycle is more or less horizontal.
The settings for the wheel recesses and on the rotary lever on the pedal crank recess should be noted and saved for each bicycle. It is recommended to attach a warning sign at the rearmost bicycle to increase visibility. Apply the adapter to the rear wheel recesses using the strap carrier system as shown in the retainers.