2004 Nissan Sentra - Audio Visual System (Section AV) (14 pages)
Download Audio Visual System (Section AV)
Manual Description
Wiring Diagram — AUDIO — /Base Mid Level, wiring Diagram — AUDIO — /Premium System 6, bASE AND MID LEVEL SYSTEM 9, audio Unit/CD Changer (If Equipped) Removal.
LOCKING CD CHANGER UNIT MECHANISM 11, subwoofer (With Premium Audio System) Removal, refer to Owner's Manual for audio system operating instructions, power is supplied all times.
With the ignition switch in the ACC or ON position, power supplied, ground is supplied through the case audio unit, through audio unit terminals 1, 2, 3, 4, 13, 14, 15 16, ground is supplied to subwoofer amp.
To audio amplifier terminals 1 2, to audio amplifier terminals 3 4, through body grounds B13 B19, through audio unit terminals 1, 2, 3, 4, 12.
To audio amplifier terminals 13, 14, 15, 16, 17, 18, 19, 20 24, through audio unit terminals 13, 14, 15 16, the audio signals are amplified by the audio amplifier then supplied, through audio amplifier terminals 5, 6, 7, 8, 9, 10, 11, 12.
The satellite radio tuner pre-wiring allows connection of satellite radio tuner, to satellite radio tuner pre-wiring terminal 32, to satellite radio tuner pre-wiring terminal 36, ground is supplied through the case of satellite radio tuner.
Through satellite radio tuner pre-wiring terminals 21, 22, 23 24, to audio unit terminals 41, 42, 43 44, wiring Diagram — AUDIO — /Base Mid Level System, wiring Diagram — AUDIO — /Premium System.
Turn ignition switch ON and verify that battery positive, voltage is present at terminal 10 audio unit, link box] and verify that battery positive voltage, present at terminal 6 audio unit.
At audio amplifier terminals 1 2, and audio amplifier terminal 24, between audio unit audio amplifier, all voltage inspections made with.
Audio unit connected (If audio unit is removed for inspection, supply a ground to the case using jumper, using a jumper wire, clip an auxiliary ground between antenna body, if reception improves, check antenna ground (at body surface), if reception does not improve, check main feeder cable for short circuit open circuit.
Audio Unit/CD Changer (If Equipped) Removal Installation, prior to removing a malfunctioning CD changer unit that will be shipped for repair, the changer mechanism MUST BE LOCKED to prevent the mechanism from being damaged during shipping, "LOCKING CD CHANGER UNIT MECHANISM", cD changer (if equipped) an assembly.
Disconnect audio unit connectors and CD changer connectors (if equipped), be sure to disconnect the harness connectors before disconnecting antenna connector, damage may result audio unit, release two tabs using a screwdriver carefully remove.
Heater A/C control bezel from audio unit face plate, audio unit face plate or audio unit damage could result, remove brackets from audio unit and CD changer (if equipped), install in reverse order removal.
Be sure to connect the antenna connector before connectAV, ing the harness connectors or damage may result audio, prior to removing a malfunctioning CD changer unit that will be shipped repair, changer.
Manual Description
Wiring Diagram — AUDIO — /Base Mid Level, wiring Diagram — AUDIO — /Premium System 6, bASE AND MID LEVEL SYSTEM 9, audio Unit/CD Changer (If Equipped) Removal.
LOCKING CD CHANGER UNIT MECHANISM 11, subwoofer (With Premium Audio System) Removal, refer to Owner's Manual for audio system operating instructions, power is supplied all times.
With the ignition switch in the ACC or ON position, power supplied, ground is supplied through the case audio unit, through audio unit terminals 1, 2, 3, 4, 13, 14, 15 16, ground is supplied to subwoofer amp.
To audio amplifier terminals 1 2, to audio amplifier terminals 3 4, through body grounds B13 B19, through audio unit terminals 1, 2, 3, 4, 12.
To audio amplifier terminals 13, 14, 15, 16, 17, 18, 19, 20 24, through audio unit terminals 13, 14, 15 16, the audio signals are amplified by the audio amplifier then supplied, through audio amplifier terminals 5, 6, 7, 8, 9, 10, 11, 12.
The satellite radio tuner pre-wiring allows connection of satellite radio tuner, to satellite radio tuner pre-wiring terminal 32, to satellite radio tuner pre-wiring terminal 36, ground is supplied through the case of satellite radio tuner.
Through satellite radio tuner pre-wiring terminals 21, 22, 23 24, to audio unit terminals 41, 42, 43 44, wiring Diagram — AUDIO — /Base Mid Level System, wiring Diagram — AUDIO — /Premium System.
Turn ignition switch ON and verify that battery positive, voltage is present at terminal 10 audio unit, link box] and verify that battery positive voltage, present at terminal 6 audio unit.
At audio amplifier terminals 1 2, and audio amplifier terminal 24, between audio unit audio amplifier, all voltage inspections made with.
Audio unit connected (If audio unit is removed for inspection, supply a ground to the case using jumper, using a jumper wire, clip an auxiliary ground between antenna body, if reception improves, check antenna ground (at body surface), if reception does not improve, check main feeder cable for short circuit open circuit.
Audio Unit/CD Changer (If Equipped) Removal Installation, prior to removing a malfunctioning CD changer unit that will be shipped for repair, the changer mechanism MUST BE LOCKED to prevent the mechanism from being damaged during shipping, "LOCKING CD CHANGER UNIT MECHANISM", cD changer (if equipped) an assembly.
Disconnect audio unit connectors and CD changer connectors (if equipped), be sure to disconnect the harness connectors before disconnecting antenna connector, damage may result audio unit, release two tabs using a screwdriver carefully remove.
Heater A/C control bezel from audio unit face plate, audio unit face plate or audio unit damage could result, remove brackets from audio unit and CD changer (if equipped), install in reverse order removal.
Be sure to connect the antenna connector before connectAV, ing the harness connectors or damage may result audio, prior to removing a malfunctioning CD changer unit that will be shipped repair, changer.
Nissan Models