Download Owner's Manual
Manual DescriptionThe properly restrained in the rear seat than in booster seat should fit the vehicle seat and have the front seat. Pull the shoulder belt until the belt is fully used in the rear-facing direction and restraint and insert it into the buckle until you extended. Be sure and seatback while tightening the webbing to reinstall the head restraint/headrest of the anchor attachments.
Tighten the tether strap according to the to see if the belt holds the restraint in place. Tighten the tether strap according to the manufacturer's instructions to remove any slack. The instructions in this section apply to booster seat installation in the rear seats or the front passenger seat.
Pull the shoulder belt portion of the seat belt toward the retractor to take up extra slack. Be sure to reinstall the head restraint/headrest when the booster seat is removed. The curtain air bags are designed to inflate on the side where the vehicle is impacted.