Download Owner's Manual
Stop and reverse function: The power liftgate will stop immediately if a kick motion is performed during power open or close. The liftgate can be stopped even if you do not carry the Intelligent Key. And then the power liftgate will move in the reverse direction if a kick motion is performed again.
The power liftgate can be reversed when you carry the Intelligent Key. GARAGE MODE SYSTEM (if so equipped) The liftgate can be set to open to a specific height by performing the following: 1. Open the liftgate.
2. Pull the liftgate down to the desired position and hold the liftgate (the liftgate will have some resistance when being manually adjusted). 3. While holding the liftgate in position, press and hold the power liftgate close and lock switch located on the liftgate for approximately 3 seconds or until 2 beeps are heard. The liftgate will open to the selected position setting. To change the position of the liftgate, repeat steps 1-3 for setting the position of the liftgate.