2011 Nissan Armada - Sonar System (Section SN) (54 pages)
Download Sonar System (Section SN)
Manual Description
Diagnosis Procedure (With Rear Only Sonar System)17, diagnosis Procedure (With Front Rear Sonar, component Inspection (With Front Rear Sonar System)18, component Function Check (With Front Rear.
Diagnosis Procedure (With Rear Only Sonar System)20, sONAR SYSTEM OFF SWITCH CIRCUIT INSPECTION 22, diagnosis Procedure (With Rear Only Sonar System)22, sONAR CONTROL UNIT FOR REAR ONLY.
Diagnosis Procedure (With Rear Only Sonar System) 15, sONAR CONTROL UNIT FOR FRONT AND, wiring Diagram - Front And Rear 37, precaution Necessary for Steering Wheel Rotation After Battery Disconnect 50.
(SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" 50, interview the customer to obtain detailed information about symptom, "CONSULT-III Function (SONAR)" (with front rear sonar system), repair or replace applicable parts.
The purpose of the sonar sensor preliminary check is to confirm that there are no outside factors affecting, check that the sonar sensors are properly aligned (no deformation sensor mounting areas), check that snow, mud or other foreign objects are not adhering sonar sensors, check that there is no deformation, scratches or other damage sonar sensors.
Check that water has not accumulated sonar sensors, use water, cotton swab, or other soft material cleaning sensors, check that there are no obstacles within each sonar sensor's detection range, check that there are no nearby ultrasound sources such as the sounds vehicle horns, motorcycle.
Check that the vehicle is level surface, with power and ground supplied, transmission gear selector lever in R position, and sonar system OFF, switch ON, the rear sonar system will detect obstacles within 1, vehicle operator is notified of obstacles by varied rate of tone from the sonar buzzer depending distance.
With power and ground supplied to the sonar control unit, transmission gear selector lever R position, sonar system can be disabled and the sonar buzzer silenced by momentarily pressing sonar system OFF, the rear sonar system and buzzer will be disabled and the sonar system OFF indicator will be illuminated until, the ignition switch is turned OFF.
Rear sonar system will cause the sonar system OFF indicator to go out, with power and ground supplied to the sonar control unit and the A/T selector lever in R position, stationary, object that is at least 7, detected by the rear sonar sensors, causing the sonar buzzer to sound a tone.
The object, the rate of the tone will increase, bumper, the tone will sound continuously, with power and ground supplied to the rear sonar sensors, the sonar sensors transmit an ultrasonic signal, this signal is reflected back to the sensor by objects large enough and close enough to be detected.
Sonar sensors measure the time from the transmitted signal to the time the signal is reflected back sends, this information to sonar control unit, the back-up lamp relay provides a reverse signal to sonar control unit, (view with luggage side finisher LH removed).
Sonar system OFF switch M116 6, rear sonar sensor LH outer C102, rear sonar sensor LH inner C103, rear sonar sensor RH inner C104 9.
Rear sonar sensor RH outer C105, controls sonar system provides self-diagnosis, provides reverse signal sonar control unit, sounds a signal when objects are detected in the rear vehicle.
Enables the driver to turn system off and signals system malfunction, senses objects in the rear vehicle, always perform Preliminary Check before running Self-Diagnosis Function.
Manual Description
Diagnosis Procedure (With Rear Only Sonar System)17, diagnosis Procedure (With Front Rear Sonar, component Inspection (With Front Rear Sonar System)18, component Function Check (With Front Rear.
Diagnosis Procedure (With Rear Only Sonar System)20, sONAR SYSTEM OFF SWITCH CIRCUIT INSPECTION 22, diagnosis Procedure (With Rear Only Sonar System)22, sONAR CONTROL UNIT FOR REAR ONLY.
Diagnosis Procedure (With Rear Only Sonar System) 15, sONAR CONTROL UNIT FOR FRONT AND, wiring Diagram - Front And Rear 37, precaution Necessary for Steering Wheel Rotation After Battery Disconnect 50.
(SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" 50, interview the customer to obtain detailed information about symptom, "CONSULT-III Function (SONAR)" (with front rear sonar system), repair or replace applicable parts.
The purpose of the sonar sensor preliminary check is to confirm that there are no outside factors affecting, check that the sonar sensors are properly aligned (no deformation sensor mounting areas), check that snow, mud or other foreign objects are not adhering sonar sensors, check that there is no deformation, scratches or other damage sonar sensors.
Check that water has not accumulated sonar sensors, use water, cotton swab, or other soft material cleaning sensors, check that there are no obstacles within each sonar sensor's detection range, check that there are no nearby ultrasound sources such as the sounds vehicle horns, motorcycle.
Check that the vehicle is level surface, with power and ground supplied, transmission gear selector lever in R position, and sonar system OFF, switch ON, the rear sonar system will detect obstacles within 1, vehicle operator is notified of obstacles by varied rate of tone from the sonar buzzer depending distance.
With power and ground supplied to the sonar control unit, transmission gear selector lever R position, sonar system can be disabled and the sonar buzzer silenced by momentarily pressing sonar system OFF, the rear sonar system and buzzer will be disabled and the sonar system OFF indicator will be illuminated until, the ignition switch is turned OFF.
Rear sonar system will cause the sonar system OFF indicator to go out, with power and ground supplied to the sonar control unit and the A/T selector lever in R position, stationary, object that is at least 7, detected by the rear sonar sensors, causing the sonar buzzer to sound a tone.
The object, the rate of the tone will increase, bumper, the tone will sound continuously, with power and ground supplied to the rear sonar sensors, the sonar sensors transmit an ultrasonic signal, this signal is reflected back to the sensor by objects large enough and close enough to be detected.
Sonar sensors measure the time from the transmitted signal to the time the signal is reflected back sends, this information to sonar control unit, the back-up lamp relay provides a reverse signal to sonar control unit, (view with luggage side finisher LH removed).
Sonar system OFF switch M116 6, rear sonar sensor LH outer C102, rear sonar sensor LH inner C103, rear sonar sensor RH inner C104 9.
Rear sonar sensor RH outer C105, controls sonar system provides self-diagnosis, provides reverse signal sonar control unit, sounds a signal when objects are detected in the rear vehicle.
Enables the driver to turn system off and signals system malfunction, senses objects in the rear vehicle, always perform Preliminary Check before running Self-Diagnosis Function.
Nissan Models