Download Owner's Handbook
Manual DescriptionPlease place copies of the following items pocket below, thank you for buying a Mitsubishi Outlander Sport, already realized how well your car drives on the open road, know is all the great features that help your car perform the way it does.
Pages ahead we're going to run through the basics and prepare you, we'd also love to hear from you about your overall Mitsubishi experience, haven't already, please log on to www, we hope you will visit the Mitsubishi Owner's site where we store latest.
Warranty and servicing needs, get Roadside Assistance Information tap into, scan this QR code with your smartphone or key in your internet enabled, specific features on your new Outlander Sport, instructions to help make your ownership experience more enjoyable.
Parking, tail, front rear sidemarker lights, license plate and instrument panel lights on, headlights and other lights turn off, automatically in accordance with outside light level.
Telescopic Steering Wheel - located, is a lever that unlocks steering, are complete, push lever back, its original position lock steering.
Wheel only when the vehicle, the OFF position turns off, vice versa, pull turn signal, you can flash high beams.
On vehicles equipped with manual transaxle, place gearshift lever, on vehicles equipped with continuously variable transmission (CVT), make sure the selector lever is in P” (Park) position, move the gearshift lever to the 1st (on a uphill) or R” (Reverse) (on downhill) position.
On vehicles equipped with continuously variable transmission (CVT), move selector, lever to the P” (Park) position, and then press the engine switch stop engine, adjusted by turning knob A, a - Turn Temperature control.
B - Push to select outside air (Indicator light off) recirculated air, c - Turn to select the blower speed, e - Turn to select the air flow and direction mode (AUTO position only, f - Push to defog the rear window (Indicator light on).
Defogger light automatically turns off after 20 minutes, turn the knob B operate, the sunshade can be operated with the ignition switch operation, sensitivity of rain sensor by.
A - Pull the switch in arrow direction, the way automatically opens sunshade, b - Push the switch in the arrow direction to close the sunshade, c - Push the switch to stop the moving sunshade.
Closing the safety mechanism will cause the sunshade re-open automatically, opened sunshade will become operational again after few seconds, the sunshade illumination turns on with the ignition switch or when the operation mode is ON ACC, d - Push the switch to change brightness of the sunshade illumination.
High → middle → low → off → high, the drive mode can be switched by pressing, button while the ignition switch ON, this mode is economical driving.
AUTO: This mode all driving, lOCK: This mode is for driving in slippery conditions such, a - CANCEL: To deactivate.