2013 Mitsubishi L200 - Owner's Manual (362 pages)
Download Owner's Manual
Manual Description
Easy select 4WD: Shifting to rear-wheel drive or 4-wheel drive can be made by operating the transfer shift lever (A). Shift the transfer shift lever to an appropriate position according to the road surface conditions. In addition, the 2WD/4WD operation indication lamp indicates the transfer shift lever shifting state.
Refer to “2WD/4WD operation indication lamp” on page 4-24 The 2WD/4WD operation indication lamp will go out momentarily during shifting process from “4H” to “4L” or vice versa, as the transfer shift lever passes through the neutral position. Be sure to operate the transfer shift lever until the 2WD/4WD operation indication lamp illuminates again. l If, after a “4H” ↔ “4L” selection has been made, the 2WD/4WD operation indication lamp remains off and the desired range is not actually selected, return the transfer shift lever to its previous position.
Place the steering wheel in the straight ahead position, drive the vehicle forward, and release the accelerator pedal. Next, hold down the clutch pedal (with manual transmission) or place the selector lever in the “N” (NEUTRAL) position (with automatic transmission) and make the range selection again.
Manual Description
Easy select 4WD: Shifting to rear-wheel drive or 4-wheel drive can be made by operating the transfer shift lever (A). Shift the transfer shift lever to an appropriate position according to the road surface conditions. In addition, the 2WD/4WD operation indication lamp indicates the transfer shift lever shifting state.
Refer to “2WD/4WD operation indication lamp” on page 4-24 The 2WD/4WD operation indication lamp will go out momentarily during shifting process from “4H” to “4L” or vice versa, as the transfer shift lever passes through the neutral position. Be sure to operate the transfer shift lever until the 2WD/4WD operation indication lamp illuminates again. l If, after a “4H” ↔ “4L” selection has been made, the 2WD/4WD operation indication lamp remains off and the desired range is not actually selected, return the transfer shift lever to its previous position.
Place the steering wheel in the straight ahead position, drive the vehicle forward, and release the accelerator pedal. Next, hold down the clutch pedal (with manual transmission) or place the selector lever in the “N” (NEUTRAL) position (with automatic transmission) and make the range selection again.
Mitsubishi Models