2011 Mitsubishi Colt - Owner's Manual (274 pages)
Download Owner's Manual
Manual Description
l If the Auto Stop & Go (AS&G) system operates while the air conditioner is operating, both the engine and the air conditioning compressor will stop. Therefore, only the blower will operate. l If air is flowing from the demister and the engine is stopped automatically, it is recommended to set the mode selection dial to the Demister/Face or Foot/Demister position.
Refer to “Changing the mode selection” on pages 5-02, 5-02. l If the air conditioner is operating, set the temperature control dial to 22°C or higher to lengthen the time that the engine is stopped automatically. l If the air conditioner is operating when the ambient temperature is high, such as during the summer, change the air selection from outside air to recirculated air to lengthen the time that the engine is stopped automatically.
The Auto Stop & Go (AS&G) system is automatically activated when the ignition switch is turned to the “ON” position. You can deactivate the system by pressing the “Auto Stop & Go (AS&G) OFF” switch. When the Auto Stop & Go (AS&G) system is deactivated, the “ ” indication lamp will be illuminated in the meter. To reactivate the Auto Stop & Go (AS&G) system, press the “Auto Stop & Go (AS&G) OFF” switch; the indication lamp will turn off.
Manual Description
l If the Auto Stop & Go (AS&G) system operates while the air conditioner is operating, both the engine and the air conditioning compressor will stop. Therefore, only the blower will operate. l If air is flowing from the demister and the engine is stopped automatically, it is recommended to set the mode selection dial to the Demister/Face or Foot/Demister position.
Refer to “Changing the mode selection” on pages 5-02, 5-02. l If the air conditioner is operating, set the temperature control dial to 22°C or higher to lengthen the time that the engine is stopped automatically. l If the air conditioner is operating when the ambient temperature is high, such as during the summer, change the air selection from outside air to recirculated air to lengthen the time that the engine is stopped automatically.
The Auto Stop & Go (AS&G) system is automatically activated when the ignition switch is turned to the “ON” position. You can deactivate the system by pressing the “Auto Stop & Go (AS&G) OFF” switch. When the Auto Stop & Go (AS&G) system is deactivated, the “ ” indication lamp will be illuminated in the meter. To reactivate the Auto Stop & Go (AS&G) system, press the “Auto Stop & Go (AS&G) OFF” switch; the indication lamp will turn off.
Mitsubishi Models