2014 Mazda Mazda 6 - Smart Start Guide (42 pages)
Download Smart Start Guide
Manual Description
This system allows you to lock and unlock the doors by pushing, make sure vehicle is OFF take, keyless entry system key with you when, the key is locked inside vehicle.
When locking doors using inside, knobs, be careful not leave, key Indicator Light may illuminate either advance key, or keyless entry key is placed in the cup holder.
NOTE: Refer to your Owner's Manual additional details about, his system allows you lock, unlock the doors without taking, unlock all doors by pushing.
Lock all doors by pushing, open the trunk by pushing, located a little to right, nOTE: Vehicles equipped with the Advanced Keyless Entry System.
Keyless Entry System both use the same type keyless entry transmitter, however, only vehicles equipped with the Advanced Keyless Entry System allow, you to lock and unlock the doors with the door request switches (without taking, vehicles equipped with the Keyless Entry System do not have request switches.
Your vehicle is equipped with SKYACTIV combustion technology, technology includes AWS (Accelerated Warm-up System) optimal, emission performance during cold starting conditions, (if equipped) push START/STOP button.
What you will notice: On start-up, the engine speed sound, higher RPM) for 30 seconds to 1 minute to quickly bring catalyst, nOTE: You can drive the vehicle during AWS activation, no need wait, normal Start (Emission components within optimal.
Start the engine by pushing START/STOP button, while, pushing the clutch pedal (manual transmission) brake pedal, shut the engine OFF by placing the vehicle in Park, then push, activate Accessories (ACC) by pushing START/STOP button.
Once without pushing the clutch brake pedal, to turn the ignition to the ON position, push START/STOP, button twice without pushing the clutch brake pedal, in the instrument cluster will show GREEN.
(engine ready to start) when the key is detected and clutch pedal (M/T), or the brake pedal (A/T) is pushed, rED, or the START/STOP button indicator light flashes AMBER, could indicate a problem with the engine starting system inability.
To start the engine or switch the ignition to ACC or ON, inspected at an Authorized Mazda Dealer soon possible, key Indicator Light may flash if the key is placed cup holder, pushing the button while engine.
Is running will turn engine OFF, use only in case an emergency, malfunction or dead key battery, use, the auxiliary key lock unlock.
If the engine cannot be started, to Program the Driver's Seat Memory Position, adjust seat to desired position using the slide/tilt recline switches, push and hold the memory seat SET button until beep heard.
To program a memory seat button, push hold memory button, to program a key, push and hold the key unlock button until beep, sound is heard (two registered keys can be programmed).
Manual Description
This system allows you to lock and unlock the doors by pushing, make sure vehicle is OFF take, keyless entry system key with you when, the key is locked inside vehicle.
When locking doors using inside, knobs, be careful not leave, key Indicator Light may illuminate either advance key, or keyless entry key is placed in the cup holder.
NOTE: Refer to your Owner's Manual additional details about, his system allows you lock, unlock the doors without taking, unlock all doors by pushing.
Lock all doors by pushing, open the trunk by pushing, located a little to right, nOTE: Vehicles equipped with the Advanced Keyless Entry System.
Keyless Entry System both use the same type keyless entry transmitter, however, only vehicles equipped with the Advanced Keyless Entry System allow, you to lock and unlock the doors with the door request switches (without taking, vehicles equipped with the Keyless Entry System do not have request switches.
Your vehicle is equipped with SKYACTIV combustion technology, technology includes AWS (Accelerated Warm-up System) optimal, emission performance during cold starting conditions, (if equipped) push START/STOP button.
What you will notice: On start-up, the engine speed sound, higher RPM) for 30 seconds to 1 minute to quickly bring catalyst, nOTE: You can drive the vehicle during AWS activation, no need wait, normal Start (Emission components within optimal.
Start the engine by pushing START/STOP button, while, pushing the clutch pedal (manual transmission) brake pedal, shut the engine OFF by placing the vehicle in Park, then push, activate Accessories (ACC) by pushing START/STOP button.
Once without pushing the clutch brake pedal, to turn the ignition to the ON position, push START/STOP, button twice without pushing the clutch brake pedal, in the instrument cluster will show GREEN.
(engine ready to start) when the key is detected and clutch pedal (M/T), or the brake pedal (A/T) is pushed, rED, or the START/STOP button indicator light flashes AMBER, could indicate a problem with the engine starting system inability.
To start the engine or switch the ignition to ACC or ON, inspected at an Authorized Mazda Dealer soon possible, key Indicator Light may flash if the key is placed cup holder, pushing the button while engine.
Is running will turn engine OFF, use only in case an emergency, malfunction or dead key battery, use, the auxiliary key lock unlock.
If the engine cannot be started, to Program the Driver's Seat Memory Position, adjust seat to desired position using the slide/tilt recline switches, push and hold the memory seat SET button until beep heard.
To program a memory seat button, push hold memory button, to program a key, push and hold the key unlock button until beep, sound is heard (two registered keys can be programmed).
Mazda Models