2005 Lexus RX330 - Electrical Components (22 pages)

Model: 2005 Lexus RX330
File size: 0.45 MB
Pages: 22 pages



Download Electrical Components

Manual Description
Checking and replacing blade type fuses, h−LP R LWR”, H−LP R UPR”, h−LP L UPR”, H−LP L LWR”, light, foot lights, scuff plate lights.

The battery produces flammable explosive, the electrolyte contains poisonous corrosive, d Avoid contact with eyes, skin clothes, d Never inhale swallow electrolyte.

D Wear protective safety glasses when working near, d Keep children away battery, d If electrolyte gets in your eyes, flush your eyes with, clean water immediately get immediate medical.

Sponge or cloth while traveling medical office, d If electrolyte gets on your skin, thoroughly wash, d If electrolyte gets on your clothes, there, possibility of its soaking through your skin, so.

Immediately take off the exposed clothing follow, d If you accidentally swallow electrolyte, drink large, magnesia, beaten raw egg or vegetable oil, check the battery for corroded loose connections.

D Make sure the engine and all accessories turned, d When checking the battery, remove ground cable, d Take care no solution gets into battery when, if the battery is disconnected run down.

The following functions may not operate correctly when you, do the each instructions referring following pages, d Power back door (See page 42, d Power windows (See page 65.

D Moon roof (See page 131 134, check the battery condition by indicator color, rED — Have the battery checked by your Lexus dealer, cLEAR or LIGHT YELLOW — Have battery checked.

Do not refill battery with water, during recharging, the battery producing hydrogen, sure to disconnect ground cable, connecting the charger cables to battery when.

D Always charge the battery in an unconfined area, not charge the battery in a garage closed room, where there not sufficient ventilation, d Only do a slow charge (5 A or less).

Never recharge the battery while engine running, also, be sure all accessories turned off, " Engine compartment 1 Pull−out tool 2 Spare fuses, determine which fuse may be causing the problem.

The fuse box shows the name of the circuit each fuse, the suspected fuse straight out with pull−out tool, replacing the suspected fuse with one of same value that, than, but as close to the amperage possible.

Amperage is lower than that specified, the fuse might blow out, again but this does not indicate anything wrong, the correct fuse as soon as possible return substitute, it is a good idea to purchase a set of spare fuses keep them.

If the new fuse immediately blows out, there problem with, never use a fuse with a higher amperage rating, any, other object, in place of a fuse.