2000 Lexus RX300 - Switches (21 pages)
Download Switches
Manual Description
Headlight dimmer turn signal switch, rear window wiper washer switch, rear window and outside rear view mirror, to turn the lights on, twist the knob on end.
FIRST CLICKSTOP: Only parking, tail, license, plate, side marker and instrument panel lights turn on, sECOND CLICKSTOP: Headlights also turn on, tHIRD CLICKSTOP (”AUTO”): The headlights all.
Other lights automatically turn depending, the headlight indicator lights up instrument cluster, vehicles sold in Canada: When the tail lights on, the tail light indicator lights up instrument cluster.
Manually twist the knob to second clickstop, turn on the headlights they needed, immediately when entering dark tunnel, parking, when the headlight switch is turned to first second.
Clickstop, the brightness of the instrument cluster will be, reduced slightly unless the instrument panel light control, nOTE: *The operating condition sensitivity can be, the automatic light control sensor is top.
Do not place anything on the instrument panel, and/or do, not affix anything on the windshield block sensor, when the headlights come on: The lights automatically, turn off about 30 seconds after any doors.
Opened and closed with the ignition key turned, when only the taillights come on: The lights, automatically turn off with the driver's door opened, the ignition key turned to the ACC” LOCK” position.
To turn them on again, turn the ignition key ”ON”, position, or turn the headlight switch off then twist, the knob until the first or second clickstop, going to park for over one week, make sure headlight.
When the headlight switch is on with all doors locked, pushing the ”LOCK” button wireless remote, control key turns off headlights, nOTE: *The time before turning off lights can be.
The headlights turn on at reduced intensity when, parking brake is released with engine started, even, with the light switch in the ”OFF” position, go off until the ignition switch turned off.
When setting the knob to third clickstop (”AUTO”), the headlights will automatically adjust full intensity, and/or turn on the other lights depending, surroundings become brighter, the headlights will turn.
Reduced intensity, ultimately turning off other lights, to turn on the other exterior lights instrument panel, lights, twist the knob first clickstop, twist the knob to the second clickstop turn.
Headlights to full intensity driving night, to prevent the battery being discharged, do, not leave the lights longer than necessary, when the engine not running.
For high beam, push the lever forward, a blue light in the instrument cluster indicates high beam, the headlight flasher works even when headlight.
Manual Description
Headlight dimmer turn signal switch, rear window wiper washer switch, rear window and outside rear view mirror, to turn the lights on, twist the knob on end.
FIRST CLICKSTOP: Only parking, tail, license, plate, side marker and instrument panel lights turn on, sECOND CLICKSTOP: Headlights also turn on, tHIRD CLICKSTOP (”AUTO”): The headlights all.
Other lights automatically turn depending, the headlight indicator lights up instrument cluster, vehicles sold in Canada: When the tail lights on, the tail light indicator lights up instrument cluster.
Manually twist the knob to second clickstop, turn on the headlights they needed, immediately when entering dark tunnel, parking, when the headlight switch is turned to first second.
Clickstop, the brightness of the instrument cluster will be, reduced slightly unless the instrument panel light control, nOTE: *The operating condition sensitivity can be, the automatic light control sensor is top.
Do not place anything on the instrument panel, and/or do, not affix anything on the windshield block sensor, when the headlights come on: The lights automatically, turn off about 30 seconds after any doors.
Opened and closed with the ignition key turned, when only the taillights come on: The lights, automatically turn off with the driver's door opened, the ignition key turned to the ACC” LOCK” position.
To turn them on again, turn the ignition key ”ON”, position, or turn the headlight switch off then twist, the knob until the first or second clickstop, going to park for over one week, make sure headlight.
When the headlight switch is on with all doors locked, pushing the ”LOCK” button wireless remote, control key turns off headlights, nOTE: *The time before turning off lights can be.
The headlights turn on at reduced intensity when, parking brake is released with engine started, even, with the light switch in the ”OFF” position, go off until the ignition switch turned off.
When setting the knob to third clickstop (”AUTO”), the headlights will automatically adjust full intensity, and/or turn on the other lights depending, surroundings become brighter, the headlights will turn.
Reduced intensity, ultimately turning off other lights, to turn on the other exterior lights instrument panel, lights, twist the knob first clickstop, twist the knob to the second clickstop turn.
Headlights to full intensity driving night, to prevent the battery being discharged, do, not leave the lights longer than necessary, when the engine not running.
For high beam, push the lever forward, a blue light in the instrument cluster indicates high beam, the headlight flasher works even when headlight.
Lexus Models