2015 Lexus IS250 - Headlight switch (15 pages)
Download Headlight switch
Manual Description
The headlights can be operated manually automatically, the headlights, daytime running lights all lights, turning on high beam headlights, with the headlights on, push.
Lever away from you turn, pull the lever toward you center, position to turn high beams off, pull the lever toward you release.
It to flash high beams once, you can flash the high beams with, ● To make your vehicle more visible to other drivers, the parking lights turn automati, cally (at an increased intensity) whenever the engine is started and parking brake.
● Compared to turning on the headlights, the daytime running light system offers greater, durability and consumes less electricity, so it can help improve fuel economy, the sensor may not function properly an, object is placed on the sensor, anything that.
Blocks the sensor is affixed windshield, doing so interferes with sensor detecting, the level of ambient light may cause, : The headlights and tail lights turn off 30.
Seconds after the engine switch is turned to ACCESSORY mode or turned off, door is opened and all of the doors and trunk are closed, to turn the lights on again, turn the engine switch to IGNITION ON mode, turn, light switch off once then back.
The level of the headlights is automatically adjusted according to the number of passengers and the loading condition of the vehicle to ensure that the headlights do not interfere with other road users, a buzzer sounds when the engine switch is turned off or turned ACCESSORY mode, and the driver's door is opened while the lights turned on, operation guide display (vehicles with rain-sensing windshield wipers only).
When the headlight switch is operated to and from the AUTO” position, the current status is displayed on the meters for a few seconds to show that AUTO mode activated, do not leave the lights on longer than necessary when the engine not running, the Automatic High Beam uses an in-vehicle camera sensor assess, brightness of streetlights, the lights of oncoming preceding vehicles, etc.
And automatically turns the high beam on off necessary, activating the Automatic High Beam system, push the lever away you with, the Automatic High Beam indicator will.
Come on when headlights turned, on automatically to indicate that system active, high beam automatic turning off conditions, when all of the following conditions are met, the high beam will be automatically.
Turned on (after approximately 1 second), ● Vehicle speed is above approximately 21 mph (34 km/h), ● The area ahead of vehicle dark, ● There are no oncoming or preceding vehicles with headlights tail lights.
● There are few streetlights road ahead, ● Vehicle speed drops below approximately 17 mph (27 km/h), ● The area ahead of the vehicle not dark, ● Oncoming or preceding vehicles have headlights or tail lights turned on.
● There are many streetlights road ahead, turning the high beam on/off manually, pull the lever original position, push the lever away from you to activate the Automatic High Beam system again.
Will turn off and the high beam indicator will turn on, press the switch to activate the Automatic High Beam system again, the Automatic High Beam can be operated when.
Manual Description
The headlights can be operated manually automatically, the headlights, daytime running lights all lights, turning on high beam headlights, with the headlights on, push.
Lever away from you turn, pull the lever toward you center, position to turn high beams off, pull the lever toward you release.
It to flash high beams once, you can flash the high beams with, ● To make your vehicle more visible to other drivers, the parking lights turn automati, cally (at an increased intensity) whenever the engine is started and parking brake.
● Compared to turning on the headlights, the daytime running light system offers greater, durability and consumes less electricity, so it can help improve fuel economy, the sensor may not function properly an, object is placed on the sensor, anything that.
Blocks the sensor is affixed windshield, doing so interferes with sensor detecting, the level of ambient light may cause, : The headlights and tail lights turn off 30.
Seconds after the engine switch is turned to ACCESSORY mode or turned off, door is opened and all of the doors and trunk are closed, to turn the lights on again, turn the engine switch to IGNITION ON mode, turn, light switch off once then back.
The level of the headlights is automatically adjusted according to the number of passengers and the loading condition of the vehicle to ensure that the headlights do not interfere with other road users, a buzzer sounds when the engine switch is turned off or turned ACCESSORY mode, and the driver's door is opened while the lights turned on, operation guide display (vehicles with rain-sensing windshield wipers only).
When the headlight switch is operated to and from the AUTO” position, the current status is displayed on the meters for a few seconds to show that AUTO mode activated, do not leave the lights on longer than necessary when the engine not running, the Automatic High Beam uses an in-vehicle camera sensor assess, brightness of streetlights, the lights of oncoming preceding vehicles, etc.
And automatically turns the high beam on off necessary, activating the Automatic High Beam system, push the lever away you with, the Automatic High Beam indicator will.
Come on when headlights turned, on automatically to indicate that system active, high beam automatic turning off conditions, when all of the following conditions are met, the high beam will be automatically.
Turned on (after approximately 1 second), ● Vehicle speed is above approximately 21 mph (34 km/h), ● The area ahead of vehicle dark, ● There are no oncoming or preceding vehicles with headlights tail lights.
● There are few streetlights road ahead, ● Vehicle speed drops below approximately 17 mph (27 km/h), ● The area ahead of the vehicle not dark, ● Oncoming or preceding vehicles have headlights or tail lights turned on.
● There are many streetlights road ahead, turning the high beam on/off manually, pull the lever original position, push the lever away from you to activate the Automatic High Beam system again.
Will turn off and the high beam indicator will turn on, press the switch to activate the Automatic High Beam system again, the Automatic High Beam can be operated when.
Lexus Models