Download Owner's Manual
Manual DescriptionThe vehicle will go into the sequential mode, and the M (sequential mode) indicator and sequential mode gear selection indicator will come on. If the vehicle speed increases and the engine speed reaches near the tachometer’s red zone, the transmission automatically shifts up to the next gear. You can cancel this mode by holding the + paddle shifter for two seconds or push button.
When the sequential mode is canceled, the sequential mode indicator and sequential mode gear selection indicator go off. Each paddle shift operation makes a single gear change. To change gears continuously, release the paddle shifter before pulling it again for the next gear.
If the sequential mode gear selection indicator blinks when you try to shift up or down, this means your vehicle speed is not in its allowable gear range. Slightly accelerate to shift up and decelerate to shift down while the indicator is blinking. Maintains a constant vehicle speed without having to keep your foot on the accelerator.